Easy World Automation | Proxim Edge Quickbridge QB-1025-LNK-WD Point-to-Point Radio

Proxim Edge Quickbridge QB-1025-LNK-WD Point-to-Point Radio

  • High throughput with radio rates of 400 Mbps in MIMO 2x2:2 mode at 40 MHz (License upgradable to 1 Gbps in MU-MIMO 4x4:4 mode at 80 MHz)1
  • High power radio delivering up to 27 dBm (4 RF) at 5 GHz.
  • High reliability and advanced QoS for quad-play applications.
  • Dual IPv4 and IPv6 stacks.
  • IP67 rated enclosure with surged protected ethernet port.

Description

The Proxim Edge Quickbridge 1025 is a highly reliable outdoor, high throughput Point to-Point system designed to deliver years of reliable service and priced to fit cost-sensitive medium-range backhaul projects. The Edge Quickbridge is powered by Proxim’s advanced Wireless Outdoor Router Protocol (WORP). Among the many benefits of WORP is its effective use of bandwidth, granular service level management, and an advanced Quality of Service engine.


You can place an order for the Proxim Edge Quickbridge QB-1025-LNK-WD Point-to-Point Radio, which is applicable in the Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Radio Specifications
MIMO 2x2:2 (license upgrade to 4x4:4)
Modulation OFDM BPSK-QAM256
Frequency 5.150 – 5.925 GHz (Subject to Country Regulations)
Channel Size 20 and 40 MHz (license upgrade to 80 MHz)
Data Rate Upto 400 Mbps (license upgrade upto 1000 Mbps)
TX Power Up to 24 dBm (dual chain) or 27 dBm (quad chain)
Throughput License upgradable to 1 Gbps
TX Power Control 0 - 17 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support
Antenna
Antenna Type Integrated 2x2 MIMO 15 dBi Dual Polarized 30-degree Panel Antenna plus Four RP-SMA Connectors (Software switch between integrated antenna and connectors)
Management
Remote Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Standards and Protocols
Synchronization -
Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Power Requirement
Power Consumption 10 W in MIMO 2x2 mode, 16 W in MIMO 4x4 mode
Power Supply 802.3af/at compliant (MIMO 4x4 mode requires 802.3at)
Physical Characteristics
Temperature OPERATING -30º to 55º Celsius (-22º to 131º Fahrenheit), STORAGE -50º to 70º Celsius (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in)
Dimensions Unpackaged 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in)
Weight (PACKAGED) 2.85 kg (6.28 lbs)
Weight (UNPACKAGED) 1.24 kg (2.73 lbs)
Standards and Certifications UL/IEC/EN 62386-1 and 60950-22
Safety UL/IEC/EN 62386-1 and 60950-22
Wind Loading 180 km/h (112.5 mph)
General
MTBF 250 000 hours
Package Checklist
Package Contents One Edge Quickbridge QB-1025-LNK with integrated antenna plus four RP-SMA connectors (Two QB-1025-EPR), Ten RP-SMA weather proofing caps, Two M25 weather proofing cable glands, Two power injectors, and country-specific power cords, Two full axis mounting kits, Two Grounding kits, Two Quick Installation Guides