Description
The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as the CPU, system power supply (PS), I/O circuits of the input and output modules, and, if necessary, the sensors and actuators with 24 V DC.
- The load current supplies are directly fastened to the S7-1500 mounting rail (without connection to the backplane bus) and can be mounted directly to the left of the CPU (no installation clearance required)
- Diagnostics LEDs to indicate status and faults: Operation, Fault, Stand-by
- ON/OFF switches (operation/stand-by) in case of swapping modules
- Mains connection plug with touch protection and strain relief for connection of input voltage (enables permanent wiring)
- Plug-in 24 V DC output terminal with reverse polarity protection for connection of 24 V loads (enables permanent wiring)
- Connection to all 1-phase 50/60 Hz networks (120 / 230 V AC) through automatic range switching Short-term mains buffering
You can place an order for the SIEMENS SCALANCE SIMATIC PM 1507/1AC/24V/8A DIN-rail Power Supply, which is applicable in the Marine industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Power Requirements | |
---|---|
Power | 192 W |
Input | at AC 1 rated value : 85 to 132 V, at AC 2 rated value : 170 to 264 V |
Output | 24V DC |
Over-voltage Protection | : 2.3 × Vin rated, 1.3 ms |
Overload Protection | - |
Type | - |
Reset | - |
Inrush Current | 3 ms |
Physical Characteristics | |
Dimension | 40 x 40mm |
Weight | 0.74 kg |
Operating Temperature | 0 to 60°C |
Relative Humidity | Climate class 3K3, 5 to 95% no condensation |
Safety | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2; Class I |
EMC | EN 55022 Class B, EN 61000-3-2, EN 61000-6-2 |