Description
The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as the CPU, system power supply (PS), I/O circuits of the input and output modules, and, if necessary, the sensors and actuators with 24 V DC.
- The load current supplies are directly fastened to the S7-1500 mounting rail (without connection to the backplane bus) and can be mounted directly to the left of the CPU (no installation clearance required)
- Diagnostics LEDs to indicate status and faults: Operation, Fault, Stand-by
- ON/OFF switches (operation/stand-by) in case of swapping modules
- Mains connection plug with touch protection and strain relief for connection of input voltage (enables permanent wiring)
- Plug-in 24 V DC output terminal with reverse polarity protection for connection of 24 V loads (enables permanent wiring)
- Connection to all 1-phase 50/60 Hz networks (120 / 230 V AC) through automatic range switching Short-term mains buffering
You can place an order for the SIEMENS SCALANCE SIMATIC PM 1507/1AC/24V/3A DIN-rail Power Supply, which is applicable
in the Marine industry, online via one of our Middle East
branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a
specific time.
Specification
| Power Requirements | |
|---|---|
| Power | 72 W |
| Input | at AC 1 rated value : 85 to 132 V, at AC 2 rated value : 170 to 264 V |
| Output | 24 VDC |
| Over-voltage Protection | : Additional control loop, limitation (closed loop control) at < 28.8 V |
| Overload Protection | - |
| Type | - |
| Reset | - |
| Inrush Current | 3 ms |
| Physical Characteristics | |
| Dimension | 40 x 40 x 0 mm |
| Weight | 0.45 kg |
| Operating Temperature | 0 to 60°C |
| Relative Humidity | Climate class 3K3, 5 to 95% no condensation |
| Safety | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178and EN 61131-2; Protection class : Class I |
| EMC | EN 55022 Class B, EN 61000-3-2, EN 61000-6-2 |
