Westermo Cybox AP 2-W WLAN Dual Radio Railway Access Point | Easy World Automation

Westermo Cybox AP 2-W WLAN Dual Radio Railway Access Point

  • IEEE802.11ac compliant with 3 x 3 MIMO
  • Up to two Wi-Fi interfaces for dual-band mode
  • 2 x 1 Gbps Ethernet ports (M12 X-coded connectors)
  • 1 x USB/Serial Port (USB 2.0, RS232, M12 A-coded)
  • IP40-rated aluminum body and wall mounting
  • Power over Ethernet (PoE+) according to IEEE 802.3at
  • Ultra-wide-range power supply 24 to 110 VDC
  •  -40 °C to +70 °C operating temperature range

Description

The CyBox AP 2-W is a member of the CyBox family – robust access points for railway applications. It is mainly designed to meet the requirements of rolling stock applications. It offers stable, secure, and high-bandwidth connections between the local Ethernet and wireless clients. With the assistance of the access point, multiple mobile Wi-Fi-compatible devices in a passenger train or subway can communicate with the Internet or access local data, such as timetable information and multimedia data.

On the fixed network side, the access point features two Gigabit Ethernet ports, which are, as an option, internally connected to an unmanaged switch and can be used either for redundancy to increase the availability of services or to connect a second CyBox AP 2-W. The bypass relay option ensures a high-speed connection even if the access point is powered down. The CyBox AP 2-W provides flexible powering options by either an internal power supply or Power-over-Ethernet (PoE+). The PoE daisy chaining offers wireless connectivity with two access points using just one cable – a noticeable cost-saving factor, especially in retrofit programs.

The CyBox AP 2-W firmware provides a convenient management interface via a web service. Besides global setup parameters, the open-source software OpenWrt allows the configuration of the radio interfaces, including provider information and the login dialog, as well as the setup of the stateful firewall. The access point, router configurations, and management firmware can be updated remotely. Furthermore, the built-in, fully configurable stateful firewall and multi-VPN support with hardware-accelerated encryption ensure communication security.


You can also find the CyBox AP 3-W and CyBox AP-A models in the WLAN.


You can buy the Westermo Cybox AP 2-W WLAN Dual Radio Railway Access Point via inquiring online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.

Specification

Interfaces
10/100/1000BaseT(X) Ports : 2 x 10/100/1000BaseT(X), M12 X-coded connector
Modulation Type -
Frequency Band 2.412 GHz to 2.472 GHz, or 4.920 GHz to 5.825 GHz, selectable band
PoE Ports : PoE+, Class-4 powered device, IEEE 802.3at
100BaseFX Ports
Wireless Security OPEN, AES, TKIP, WPA, WPA2-PSK/EAP, WPA3-PSK/EAP, mixed modes, OWE
WLAN Antenna Connector 3 x RF antennas (3 x 3 MIMO technology)
Security stateful firewall with multi-level client/AP isolation, rouge AP detection, authentication 802.1x
WLAN Operation Mode Access Point, Router
WLAN Standards IEEE 802.11 a/b/g/n/ac
1000BaseSFP Slots
Transmission Rates up to 1300 Mbps
10/100BaseT(X) Ports
Digital Inputs
Console Port
Serial Ports : 1 x RS232 Port (M12 8-pin female A-coded connector)
M12 Connector
Power Requirement
Input Current -
Connector M12 4-pin male A-coded
Input Voltage 24 to 110 VDC, wide-range power supply (compliant to EN 50155)
Power Consumption 15 W typ., 25 W max.
Reverse Polarity Protection
Physical Characteristics
Humidity max. 95 % non-condensing operating and storage
Dimensions Packaged 105 (130) mm x 55 mm x 206 mm (w h d), (incl. mounting points)
Weight (PACKAGED) up to 1350 g
Housing IP40, aluminum, conductive cooling
Installation Wall Mounting
Standards and Certifications Directive (EU) 2016/797: EN 50155 (IEC 60571), EN 45545-2 (HL 1 to HL 3), EN 61373 (Category 1, Class B); RED – 2014/53/EU: EMC, radio spectrum, health & safety; FCC: Title 47 CFR Part 15B; IEC 62380; IP40
Operating Temperature depending on temperature class of Wi-Fi module: Class OT4, -40.. +70 °C (85 °C) operating or Class OT3, -25.. +70 °C (85 °C) operating
Storage Temperature -40 to +85 °C
General
Management Remote Management: SNMP V1/V2/V3, telnet, SSH, http, https; Network Link Management: link priorization, load balancing, link aggregation
LED Indicators Power LED Status, Fail LED Status, Module 1 LED Status, Module 2 LED Status, LAN LED Status
MTBF approx. ~370.000 h (acc. to IEC 62380)
Time Management -