Westermo BRD-355 Industrial ADSL/VDSL Router
- Fixed broadband connection via ADSL or VDSL2
- 2 x 10/100 Mbit/s Ethernet ports (RJ-45 connector)
- 1 x RS-232 Serial port (9-pin D-sub connector)
- 1 x DSL Port for DSL line connection (RJ-11 connector)
- DIN-rail mount installation design
- 12 to 48 VDC input power (Wide Range 10 to 60 VDC)
- -25 to +70°C Operating temperature range
- Brand: WESTERMO
- Product Code: 3623-0311
.png)
Description
Remote access removes boundaries, eliminates the need for time-consuming site visits, and provides a network infrastructure suitable for today’s ” always-on” society. The BRD-355 industrial ADSL & VDSL2 router/modem uses the Internet to cost-effectively inter-connect systems, allowing HMI, PLCs, sensors, etc, to communicate with each other, a pre-requisite for any Industrial Internet (IIoT/IoT) solution.
Most devices today come equipped with an Ethernet port for communications; therefore, the BRD-355 has a built-in two-port Ethernet switch. For legacy connectivity, the unit also features one RS-232 port to provide multiple connection possibilities for both new and legacy replacement installations. Designed to be installed on a DIN rail, all connectors and LEDs have been positioned in the front of the unit, facing the user for easy access and fast status feedback. With the wide power input range, the unit can be powered from 10 to 60 VDC and has a low power consumption.
The cybersecurity features of the BRD-355 prevent unauthorized access and secure communication for Internet-enabled applications. The easy-to-use firewall filters incoming traffic, allowing only approved packets to pass through. To inter-connect units with each other securely over the Internet, multiple VPN technologies are supported, including IPsec and OpenVPN.
Upgrading legacy solutions to become IP-enabled can prove both costly and tedious; therefore, the BRD-355 includes a wide feature set for various legacy applications, including both modem replacement methods as well as serial-to-Ethernet conversion.
Recent technology changes by the carriers also force the industry to adapt its solutions, which is why the BRD-355 supports both ADSL Annex J and VDSL2 Vectoring, as well as most other ADSL/VDSL2 standards.
End of Life Product - Replacement Available
Please note that the BRD-355 has been phased out and replaced by the BRD-355A | BRD-355B Series.
Easy World Automation offers the easiest way to buy the Westermo BRD-355 Industrial ADSL/VDSL Router in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the
lowest price through online inquiring. Our sales experts will contact you to
fulfill all your industrial automation needs.
Specification
| Interface | |
|---|---|
| SIM card slot | |
| Ethernet Ports | : 2 x 10/100 Mbit/s TX Ports (RJ-45 connector) |
| USB | |
| Digital Input and Output | |
| Serial port | : 1 x RS-232 Serial port (9-pin D-sub connector), 300 bit/s - 115.2 kbit/s |
| Alert Output | |
| Band Options | |
| Cellular Standards | |
| Cellular Antenna Connectors | |
| WLAN Standards | |
| WLAN Antenna Connector | |
| GPS Antenna Connector | |
| Radio specifications | |
| Radio Connection type | - |
| Maximum data transfer speed of 2G | - |
| Maximum data transfer speed of 3G | - |
| Maximum data transfer speed of 4G | - |
| WiFi Radio Frequency | - |
| Software Specifications | |
| Routing Redundancy | VRRP |
| VPN | IPsec, OpenVPN (SSL VPN), L2TP, PPTP, GRE |
| Firewall | Stateful Inspection, NAT, Port Forwarding, ACL |
| Time Management | |
| Management | Web interface (HTTP and HTTPS), Command Line Interface (CLI) via SSHv2 and TELNET, SNMPv1/v2c/v3, Flexible alarm/event handling system, Syslog (log files and remote syslog server), NTP (NTP client), DHCP server, DDNS (Dynamic DNS update client) |
| General | |
| LED Indicators | |
| MTBF | MIL-HDBK-217K Ground Benign: 955,000 hours; MIL-HDBK-217K Ground Fixed: 238,000 hours |
| Operating mode | ADSL/VDSL Router/Bridge, Serial-to-Ethernet Converter |
| Standards and protocols | |
| Protocols | LLC/VC-MUX encap Ethernet, PPPoA, PPPoE, IPoA, Transparent |
| Features and capabilities | |
| Send and receive SMS | |
| Security | |
| Security and Encryption | |
| Authentication | Pre-shared Key (PSK) |
| Power Requirements | |
| Power Connector | - |
| Power Consumption (Output Adapter) | - |
| Input Voltage | 12 to 48 VDC (Wide Range 10 to 60 VDC) |
| POE Support | |
| Input Current | 1000 mA at 12 VDC |
| Reverse Polarity Protection | Supported |
| Buttons | |
| Power button | |
| Reset | |
| Physical Characteristics | |
| Installation | DIN-rail mounting |
| Dimensions | 53 x 103 x 92.3 mm (2.09 x 4.06 x 3.63 in) |
| Housing | - |
| Weight | 0.4 kg |
| Operating Temperature | -25 to +70°C (-13 to +158°F) |
| Storage Humidity | 0 to 90% relative humidity non condensing |
| Storage Temperature | -40 to +85ºC (-40 to +185ºF) |
| Type of Use | Industrial environment |
| Standards and Certifications | Ingress protection: IP40; MIL-HDBK-217K; EMC: EN 61000-6-1, Immunity residential environments, EN 61000-6-2, Immunity industrial environments, EN 61000-6-3, Emission residential environments, EN 61000-6-4, Emission industrial environments; Safety: EN 60950-1, IT equipment |
