Westermo BRD-355A Industrial ADSL/VDSL Router
- Fixed line broadband connection via ADSL or VDSL2
- 2 x 10/100 Mbit/s Ethernet ports (RJ-45 connector)
- 1 x RS-232 Serial port (9-pin D-sub connector)
- 1 x xDSL Port for DSL line connection (RJ-11 connector)
- IP40-rated Metal body design
- 35 mm DIN-rail mounting
- 12 to 48 VDC input power (Wide Range 10 to 60 VDC)
- Wide operating temperature range (-40 to +70°C)
.png)
Description
Remote access removes boundaries, eliminates the need for
time consuming site visits and provides a network infrastructure suitable for
today’s ”always on”-society. The BRD-355 industrial ADSL/VDSL router uses the
Internet to connect remote networks. Allowing IP enabled SCADA, HMI, PLCs,
sensors or legacy serial devices etc. to communicate with each other, a
prerequisite for any Industrial Internet (IIoT/IoT) solution.
The BRD-355 has a built-in two-port Ethernet switch and an
RS-232-port, for both new and legacy modem replacement. Designed to be
installed on a DIN rail all connectors and LEDs have been positioned on the
front of the unit, for easy access and fast status feedback.
The cybersecurity features of the BRD-355 prevent
unauthorized access and secure communication for Internet-enabled
applications. The easy-to-use firewall filters incoming and outgoing traffic,
allowing only approved packets to pass through. The BRD supports a variety of
VPN technologies to ensure that data can be sent over public or private
networks securely via SSL (OpenVPN) or IPsec. The BRD-355 has fully integrated with the easy-to-use, Westermo WeConnect high-security remote access solution.
Upgrading legacy serial or modem systems to IP-enabled, can
prove both costly and time consuming. Therefore the BRD-355 includes a wide set
of feature to allow the easy migration of the legacy serial/modem applications.
The features include interpreting the ATD modem emulation, lease line over IP
and multidrop application where a master is connected to multiple slave
locations.
You can also find the BRD-355A-AU and BRD-355B models in the
Broadband DSL Routers.
Enjoy the ease of online inquiries for the Westermo BRD-355A Industrial ADSL/VDSL Router. You can
submit your inquiry on our website and get the friendliest communication with
our experts to choose high-quality industrial automation products at a
reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| SIM card slot | |
| Ethernet Ports | : 2 x 10/100 Mbit/s TX Ports (RJ-45 connector) |
| USB | |
| Digital Input and Output | |
| Serial port | : 1 x RS-232 Serial port (9-pin D-sub connector), 300 bit/s - 115.2 kbit/s |
| Alert Output | |
| Band Options | |
| Cellular Standards | |
| Cellular Antenna Connectors | |
| WLAN Standards | |
| WLAN Antenna Connector | |
| GPS Antenna Connector | |
| Radio specifications | |
| Radio Connection type | - |
| Maximum data transfer speed of 2G | - |
| Maximum data transfer speed of 3G | - |
| Maximum data transfer speed of 4G | - |
| WiFi Radio Frequency | - |
| Software Specifications | |
| Routing Redundancy | VRRP |
| VPN | IPsec, OpenVPN (SSL VPN), L2TP, PPTP, GRE |
| Firewall | Stateful Inspection, NAT, Port Forwarding |
| Time Management | |
| Management | WeConfig, web interface (HTTP and HTTPS), Command Line Interface (CLI) via SSHv2 and Telnet, SNMPv1/v2c/v3, RFC5424/RFC3164 Syslog (log files and remote syslog server) |
| General | |
| LED Indicators | : STS, xDSL |
| MTBF | MIL-HBDK-217F: 995,000 hours |
| Operating mode | ADSL/VDSL Router/Bridge, Serial-to-Ethernet Converter |
| Standards and protocols | |
| Protocols | xDSL protocols: TI.413, ADSL (A), G.Lite, ADSL2 (A/L/M), ADSL2+ (A/M), VDSL2 (8a, 8b, 8c, 8d/12a, 12b/17a), VDSL2 Vectoring |
| Features and capabilities | |
| Send and receive SMS | |
| Security | |
| Security and Encryption | |
| Authentication | Pre-shared Key (PSK), TLS |
| Power Requirements | |
| Power Connector | - |
| Power Consumption (Output Adapter) | - |
| Input Voltage | 12 to 48 VDC (Wide Range 10 to 60 VDC) with Galvanic isolation to all ports |
| POE Support | |
| Input Current | 1000 mA at 12 VDC |
| Reverse Polarity Protection | Supported |
| Buttons | |
| Power button | |
| Reset | |
| Physical Characteristics | |
| Installation | DIN-rail mounting |
| Dimensions | 53 x 103 x 92.3 mm (2.09 x 4.06 x 3.63 in) |
| Housing | Full metal |
| Weight | 0.4 kg |
| Operating Temperature | -40 to +70°C (-40 to +158°F) |
| Storage Humidity | 0-90% relative humidity |
| Storage Temperature | -50 to +85°C (-58 to +185°F) |
| Type of Use | Industrial environment |
| Standards and Certifications | Ingress protection: IP40; MIL-HBDK-217F; EMC: EN 55032, Electromagnetic compatibility of multimedia equipment - Emission Requirements, EN 55035, Electromagnetic compatibility of multimedia equipment - Immunity Requirements, including its amendments A11:2019; Safety: EN 62368-1, Audio/video, information and communication technology equipment - Part 1: Safety requirements including its amendments Nos. A11:2020 |
