Description
he CyBox AP 2-W is a member of the CyBox family – robust access points for railway applications. It is particularly designed to meet the requirements of rolling stock applications. It offers stable, secure, and high bandwidth connections between the local Ethernet and wireless clients. With the assistance of the access point, multiple mobile Wi-Fi-compatible devices in a passenger train or subway have the possibility to communicate with the Internet or access local data, such as timetable information and multimedia data.
On the fixed network side, the access point features two Gigabit Ethernet ports which are, as an option, internally connected to an unmanaged switch and can be used either for redundancy to increase the availability of services, or to connect a second CyBox AP 2-W. The bypass relay option ensures a high-speed connection even if the access point is powered down. The CyBox AP 2-W provides flexible powering options by either an internal power supply or Power-over-Ethernet (PoE+). The PoE daisy chaining offers wireless connectivity with two access points using just one cable – a noticeable cost saving factor especially in retrofit programs.
The CyBox AP 2-W firmware provides a convenient management interface via a web service. Besides global setup parameters the open source software OpenWrt allows the configuration of the radio interfaces, including provider information and the login dialog, as well as the setup of the stateful firewall. The access point and router configurations as well as the management firmware can be updated remotely. Furthermore the built-in fully configurable stateful firewall and multi-VPN support with hardware-accelerated encryption ensures communication security.
You can Buy the Westermo Cybox AP 3-W WLAN Dual Radio Railway Access Point via inquiring online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.
Specification
Interfaces | |
---|---|
10/100/1000BaseT(X) Ports | - |
Modulation Type | - |
PoE Ports | - |
Wireless Security | OPEN, AES, TKIP, WPA, WPA2-PSK/EAP, WPA3-PSK/EAP, mixed modes, OWE |
System Architecture | Dual-Core CPU T1023, 1200 MHz, 1 GB RAM, 128 MB Flash |
WLAN Operation Mode | Access Point |
Software | Linux OS OpenWrt |
WLAN Standards | IEEE 802.11 a/b/g/n/ac |
Reset Switch | available on the front panel |
Transmission Rates | up to 1300 Mbps |
USB/Serial Port | M12 8-pin female A-coded, USB 2.0, RS232 |
Digital Inputs | |
Console Port | - |
Antenna | |
Antenna Type | QLS connectors |
Security | |
Security | stateful firewall with multi-level client/AP isolation,, rouge AP detection, authentication 802.1x |
Power Requirement | |
Input Current | - |
Input Voltage | - |
Power Consumption | 15 W typ., 25 W max. |
Reverse Polarity Protection | - |
Power Over Ethernet (PoE) | PoE+, Class-4 powered device, IEEE 802.3at |
Physical Characteristics | |
Humidity | max. 95 % non-condensing operating and storage |
Dimensions Packaged | 105 (130) mm x 55 mm x 206 mm (w h d), (incl. mounting points) |
IP Rating | IP40 |
EMC | |
EMI | - |
Weight (PACKAGED) | up to 1350 g |
EMS | - |
Housing | IP40, aluminum, wall mount, conductive cooling |
Standards and Certifications | EN 50155 (IEC 60571), EN 45545-2 (HL 1 to HL 3), EN 61373 (Category 1, Class B), RED – 2014/53/EU EMC, radio spectrum, health & safety, Title 47 CFR Part 15B |
Operating Temperature | e depending on the temperature class of the Wi-Fi module, Class OT4, -40 to +70 °C (85 °C) operating or, Class OT3, -25 to +70 °C (85 °C) operating, -40 to +85 °C storage |
Safety | |
Storage Temperature | -40 to +85 °C |
General | |
Management | Fleet Management |
LED Indicators | - |
MTBF | approx. ~370.000 h (acc. to IEC 62380) |
Wireless | |
RF Environment | 3x RF antennas, 3x3 MIMO technology |
Frequency Range | 2.412 GHz to 2.472 GHz, or 4.920 GHz to, 5.825 GHz, selectable band |
Operational Feature | up to 128 clients per radio |