Proxim Stratum SX3-1021A-WD Quickbridge Point-to-Point Radio | Easy World Automation

Proxim Stratum SX3-1021A-WD Quickbridge Point-to-Point Radio

  • Pair of 5 GHz All-purpose unit (BSU single or SU), PN: 907-00014
  • Capable of throughput up to 1Gbps
  • Wide Band Radio - 5.150 – 5.850 GHz
  • One 1 Gbps Ethernet with PoE in, One 1 Gbps Ethernet with PoE out, One 1 Gbps Ethernet (RJ45)
  • AES 128-bit encryption is upgradeable to 256-bit
  • Full tilt and swivel mounting kit included
  • Integrated 2x2 MIMO 22 dBi dual-polarized 10-degree Panel Antenna plus two RP-SMA Connectors
  • IP67-rated metal enclosures and operate from -40º to + 60º

Description

The Stratum X3 Quickbridge - 5GHz is a high-performance MIMO 2x2 point-to-point bridge-in-a-box solution capable of throughput up to 1Gbps. It’s an ideal option for customers who require a fast and efficient setup of medium to long-range point-to-point wireless networks. The Stratum™️ X3 Quickbridge® is designed to simplify the installation of point-to-point networks and includes a bundle of two preconfigured Stratum X3 endpoints that have been paired ready for service in the field.

Both connectorized and integrated antenna models are available, and all models are housed in IP67-rated metal enclosures and operate from -40 o to + 60 °C.

Advanced Interference Management

To achieve peak performance in challenging RF environments characterized by dense unlicensed radio usage and significant interference, the Stratum X3–5GHz utilizes our highly efficient WORP® (Wireless Outdoor Router Protocol). Proxim ClearConnect®, a crucial component of WORP®, provides effective interference management.

Security

Over-the-air transmission is secured via 128-bit AES encryption, with an option to upgrade to 256-bit when ultra-high security is desired. In a WORP®-powered network, a base station autonomously handles on-demand bandwidth allocation and quality of service (QoS) settings based on the specific requirements of each client within the network.

Rugged Reliability

Stratum X3 features a robust IP67-rated metal enclosure designed to provide dependable performance over many years, even in severe conditions including strong winds, high salt exposure, and extreme temperatures.

Proxim WORP®

WORP® is a dynamic, asynchronous protocol designed to optimize the performance of outdoor wireless point-to-point and point-to-multipoint wireless links. WORP’s asynchronous nature allows the uplink and downlink to adapt to network traffic demands dynamically.

 

You can also find the Stratum SX3-1020A-WD Quickbridge, Stratum SX3-2020A-WD Quickbridge, and Stratum SX3-2021A-WD Quickbridge models in the Stratum™X3 Quickbridge.

 

Enjoy the ease of online inquiries for the Proxim Stratum SX3-1021A-WD Quickbridge Point-to-Point Radio. You can submit your inquiry on our website and get the friendliest communication with our experts to choose high-quality industrial automation products at a reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).

Specification

Interfaces
Ethernet -
Wired Ethernet One auto MDI-X RJ45 1 Gbps Ethernet with PoE in, One auto MDI-X RJ45 1 Gbps Ethernet with PoE out, One auto MDI-X RJ45 1 Gbps Ethernet
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Extension -
Management -
Radio Specifications
Radio Type Point-to-Point
MIMO 2x2:2
Modulation OFDM BPSK-QAM1024
Frequency 5.150 - 5.850 GHz (Subject to Country Regulations)
Channel Size 20, 40 and 80 MHz (80+80 and 160 MHz via future upgrade)
Data Rate -
TX Power Up to 27 dBm (dual chain)
TX Power Control 0 - 24 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Throughput Throughput - Dual Stream: 20 MHz: 223 Mbps, 40 MHz: 435 Mbps, 80 MHz: 755 Mbps
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support
Antenna
Antenna Type Integrated 2x2 MIMO 22 dBi dual Polarized 10 degree Panel Antenna plus two RP-SMA Connectors
Beam Width -
Receive Gain -
Transmit Gain -
Network
Modes Bridging, Routing
IP Stack IPv4 and IPv6 simultaneously
Latency -
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
Management
Remote Telnet and SSH 2.0, Web GUI and TLS 1.3, TFTP, SNMP v1/v2c/v3
SNMP -
Bluetooth Low Energy Proxim BlueConnect™
Multi-Language Support Web Interface available in English, French, Spanish and Chinese
Other Syslog, SNTP and local time, Spectrum analyzer
Security
Encryption AES 128 (AES 256 via license upgrade)
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
802.1X Support -
Wireless
AP-AP Communications -
RF Environment Supported
Other -
General
MTBF >450 000 hours, 2-year warranty, ServPak Extended Support available.
Power Requirement
Input Power -
Output Power -
Power Consumption 14 to 17 W max in MIMO 2x2 mode
Power Standards 802.3at compliant
Physical Characteristics
Temperature OPERATING: -40º to 60ºC, -40º to 140º Fahrenheit; STORAGE: -50º to 70ºC, -58º to 158º Fahrenheit
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 388 x 346 x 428 mm (15.27 x 13.62 x 16.85 in)
Dimensions Unpackaged 250 x 220 x 62 mm (9.84 x 8.66 x 2.44 in)
Weight (PACKAGED) 10.0 Kg (22.04 lbs)
Weight (UNPACKAGED) 1.6 Kg (3.53 lbs)
Standards and Certifications USA: EMC/EMI: CFR47, FCC part 15, Subpart B (class A), Bluetooth: FCC Part 15 Subpart C 15.247,15.205, 15.207 & 15.209, UNII 1 and 3: FCC part 15, Subpart C 15.247, 15.205, 15.207 & 15.209, Subpart E 15.407, UNII 2A and 2C: FCC part 15, subpart E 15.407, 15.247, 15.205, 15.207 & 15.209 (Pending); CANADA: EMC/EMI: ICES-003 issue 7:2020 (class A), Bluetooth: RSS-247 issue 3 & RSS Gen Issue 5, UNII 3: RSS-247 issue 3 & RSS Gen Issue 5, UNII 2A and 2C: RSS-247 issue 3 & RSS Gen Issue 5 (Pending); EUROPE: EMC/EMI: EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, RED: EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 300 328, EN 301 893, EN 302 502, EN 303 413; UK: EMC/EMI: BS EN 55032:2015+A1:2020, BS EN 55035:2017+A11:2020, UKCA: EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 300 328, EN 301 893, EN 302 502, EN 303 413
Safety IEC 62368-1:2018, EN IEC 62368-1:2020+A11:2020, BS EN IEC 62368-1:2020+A11:2020, UL 62368-1:2019, CSA C22.2 No. 62368-1:19
Wind Loading 180 km/h (112.5 mph)
Standards and Protocols
Synchronization -
Package Checklist
Package Contents One Stratum SX3-1020A unit with two RP-SMA connectors or One Stratum SX3-1021A with integrated antenna plus two RP-SMA connectors, One (SX3-1020A) or Three (SX3-1021A) RP-SMA weather proofing caps, Two M25 weather proofing cable glands, One power injector and country specific power cord, One full axis mounting kit, One Grounding kit, One Quick Installation Guide