Nexcom VTC 6200 In-Vehicle Computer
- Built-in Intel® Atom™ D510 Dual Core 1.6GHz processor
- Internal wireless communication (3.5G, GSM/GPRS, WLAN, BT)
- Smarter ignition power on/off, delay-time and low voltage
protection
- PCI104, mini-PCIe socket, and proprietary PCIe module
expansion
- 8~60V wide range DC power input
- Dual VGA output (clone mode)
- Rugged fanless design to meet IP65 and MIL standard
- Flexible chassis design for PCI-104 and HDD can be used at
the same time
- Support 2 x isolated RS232 ports (COM1, COM2)
- Isolated GPIO
Description
NEXCOM's popular VTC Series range has been extended with the launch of VTC 6200, a dedicated computing solution for in-vehicle surveillance applications.
The VTC 6200 utilizes the powerful video processing capability of the Intel® Atom™ D510 processor which can support Dual Core technology. With an additional Video Capture Module, VTC 6200 is the ideal solution for in-vehicle surveillance applications.
You can place an order for the Nexcom VTC 6200 In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
CPU | Intel® Atom™ D510 Dual Core 1.6GH |
Memory | One 200-pin DDR2 667/800MHz SO-DIMM slot (up to 2GB) |
Expansion | 1 x mini-PCIe socket (PCIe + USB) for WLAN option, 1 x mini-PCIe socket (USB) x 1 for WWAN option, 1 x Bluetooth module for option, 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning, 1 x PCI-104 |
Main Chipset | ICH-8M |
Expandable Storage | 1 x 2.5" SATA II HDD bay, 1 x SATA DOM |
Interface | |
I/O Interface-Front | 1 x Line-out, 1 x Mic-in, 1 x SIM card socket, 1 x System reset button, 2 x USB 2.0 host type A connector, 4 x LED's for power, storage, WLAN/HSDPA and GPIO, 1 x Power button, 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT) |
I/O Interface-Rear | 1 x 8~60VDC input with Ignition and 23W typical power consumption, 1 x 5V/1A and 12V/1A DC output, SMBus Fuse, 1 x DB26 LVDS interface with 12V and USB 2.0, 1 x DB9 female connector for isolated 4GPI and 4GPO, 2 x DB9 isolated RS232 port (COM1, COM2), 2 x DB9 RS-232 (COM3, COM4), 1 x DB9 isolated RS485 (COM5), 2 x DB15 VGA (clone mode), 1 x Line-out, 1 x Mic-in, 2 x USB 2.0 host type A connector, 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet, 1 x SMA-type GPS antenna connector, Mounting hole reserved:, For RF Coax to SMA Bulkhead x 1 (for GPS) reference, signal connect to function board |
Power Requirement | |
Power Management | Selectable boot-up & shut-down voltage for low power protection, HW design ready for 8-level delay time on/off at user's self configuration, Power on/off ignition, software detectable, Support S3/ S4 suspend mode |
Physical Characteristics | |
Dimensions | 260mm (W) x 176mm (D) x 70mm (H) (10.24" x 6.93" x 2.75")(support HDD and PCI-104 at the same time) |
Operating temperatures | Ambient with air -30°C to 60°C (SSD)/-30°C to 50°C (HDD) |
Storage temperatures | -40°C to 80°C |
Humidity | 10% to 90% (Non-condensing) |
Housing | Aluminum enclosure with fanless design |
Weight | 2.65 Kg (5.84 Lb) |
Environment | Vibration (random): 2g@5~500 Hz with SSD; 1g@5~500 Hz with HDD (in operation), Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle, Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test, Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g, Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g |
Standards/Certifications | CE approval, FCC Class B, e13 Mark |
Compatible Operating Systems | |
Operating System | Windows XP/WES2009, WES 7E |