Nexcom VMD 2000 Vehicle Mount Display
- 8" SVGA TFT LCD monitor
- Automatic/ Manual brightness control
- Remote system power control
- On screen control buttons
- Support USB 2.0 and card reader
- Front panel compliant with IP54
- Sunlight readable solution with 800cd/m2 high brightness
support
Description
VMD 2000 is an 8-inch TFT LCD monitor with 4 wire-resistant touch screen sensors. With the high brightness display and automatic brightness control, it is designed for in-vehicle applications. It also provides USB and card reader features. Those friendly interfaces benefit the technicians during maintenance. Its front panel is compliant with IP54 to meet industrial applications. VMD 2000 can perfectly match any VTC series device via the 26-pin LVDS cable.
You can place an order for the Nexcom VMD 2000 Vehicle Mount Display, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| Optional Features | Sunlight-Readable Display with High Brightness LCD (800 cd/m2), Support Panel and wall mount kit |
| General | Enclosure: Plastic PC + ABS, Mounting: Support VESA 75, panel and wall mounting, Power Input: 12VDC, Power Consumption: 15W, Ingress Protection: Front panel IP54, |
| LCD Panel | 8-inch TFT LCD panel with LED backlight, 800 x 600 pixels (SVGA), Brightness: 500 cd/m² (typical), Optional high brightness for sunlight-readable with 800cd/m2, After touch screen is 640cd/m2, Contrast ratio: 500:1 (typical) |
| Touch Screen Sensor | 4-wire resistant touch, Anti-glare coating surface, Transmission rate: 82 ± 3% |
| Interface | |
| I/O Interface-Bottom | Remote System Power On/ Off Button, 1 x Mic-out, 1 x Line-in, 1 x LVDS Connector, (integrating LVDS, USB x 1 and 12Vdc x 1) |
| I/O Interface-Front | On screen display buttons x 5, Power on/off, Brightness control (+/-), Volume control (+/-), Light sensor, 2 x LED indicators, 2 x Built-in speakers (1.2W) |
| I/O Interface-Lateral | 1 x SD/ MMC/ MS card reader, 1 x USB type A Host, 1 x Line-out (automatic detection/ switch to external speaker), 1 x Mic-in |
| Physical Characteristics | |
| Operating temperature | -20°C to 60°C |
| Storage Temperature | -30°C to 70°C |
| Dimensions | 207mm (W) x 173mm (H) x 36.7mm (D) (8.15" x 6.81" x 1.44") |
| Weight | 0.7Kg, 1.54Lb |
| Environment | Vibration (random): 2.5g@5~500 Hz, Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck, Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test, Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers= 20g, Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment= 75g |
| Standards/Certifications | CE approval, FCC Class B |
