Description
VMD 1000 is a 7-inch TFT LCD monitor with 4 wire-resistant touchscreen sensors. With the high brightness display and automatic brightness control, it is designed for in-vehicle application. It also provides USB and card reader features. Those friendly interfaces benefit the technicians during maintenance. Its front panel is compliant with IP54 to meet industrial applications. VMD 1000 can perfectly match any VTC series device via the 26-pin LVDS cable.
You can place an order for the Nexcom VMD 1000 Vehicle Mount Display, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| Optional Features | Sunlight-readable touch screen, (4 wires resistive w/ anti-glare coating), Support VESA mount kit |
| General | Enclosure: Plastic PC + ABS, Mounting: Support VESA 75, panel and wall mounting, Power Input: 12VDC, Power Consumption: 12W, Ingress Protection: Front panel IP54, |
| LCD Panel | 7-inch TFT LCD panel with LED backlight, 800 x 480 pixels (WVGA), Brightness: 500 cd/m² (typical), Contrast ratio: 600:1 (typical) |
| Touch Screen Sensor | 4-wire resistant touch, Anti-glare coating surface, Transmission rate: 82 ± 3% |
| Interface | |
| I/O Interface-Bottom | Remote System Power On/ Off Button, 1 x Mic-out, 1 x Line-in, 1 x LVDS Connector, (integrating LVDS, USB x 1 and 12Vdc x 1) |
| I/O Interface-Front | 5 x Control buttons, Power on/off, Volume control (+/-), Brightness control (+/-), Light sensor, 2 x LED indicators, 2 x Built-in speakers (1W) |
| I/O Interface-Lateral | 1 x SD/ MMC/ MS Card Reader, 1 x USB type A for Storage, 1 x Line-out, (switch to external speaker by auto detection), 1 x Mic-in (from external microphone) |
| Physical Characteristics | |
| Operating temperature | -20°C to 70°C |
| Storage Temperature | -30°C to 80°C |
| Dimensions | 182mm (W) x 138mm (H) x 36.3mm (D) (7.17" x 5.43" x 1.43") |
| Weight | 0.45Kg, 0.99Lb |
| Environment | Vibration (random): 5g@5~500 Hz, Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck, Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test, Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks andsemi-trailers= 20g, Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment= 75g |
| Standards/Certifications | CE approval, FCC Class B |
