Nexcom VMC 4511-K Rugged Vehicle Mount Computer
- 12.1" XGA TFT LCD monitor with 5-wire resistive
- Compact and fanless design
- Built-in Intel® Core™ i7-2610UE processor
- Automatic/manual brightness control
- On-screen F1 ~ F10 programmable function keys
- GPS, WLAN, and WWAN supported
- CANBus 2.0B, and OBDII for car diagnostic
- Robust design with Die-cast aluminum
- All enclosure compliant with IP65
Description
VMC 4511-K, a 12.1-inch all-in-one robust vehicle mount computer, is designed for transportation, warehouses, and material handling application. Adopting the latest high-performance processor Intel® Core™ i, it integrates the high-resolution LCD with a brightness of 1300 nits (sunlight readable) and 5-wire resistive touch. VMC 4511-K is extremely ruggedness, whose aluminum enclosure is compliant with IP65 and is designed against vibration, dust, moisture, and chemical impacts. It provides RS-232, USB 2.0, DIO, CFast, and LAN to connect with necessary accessories. Besides, CANBus2.0B can help to get immediate car status for diagnosis. VMC 4511-K also offers GPS, WLAN, and WWAN for remote communication purposes. Thus, the VMC 4511-K is an ideal solution for vehicle terminals on forklifts, gantry cranes, straddle carriers, trucks, mining vehicles, and construction machines.
You can place an order for the Nexcom VMC 4511-K Rugged Vehicle Mount Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU & Chipset | Intel® Core™ i7-2610UE, Intel® QM67 PCH chipset |
| Memory | One 204-pin DDR3 1333MHz SO-DIMM slot (up to 4GB) |
| Expansion | 2 x mini-PCIe socket (PCIe + USB) for WLAN/mSATA option, 1 x mini-PCIe socket (USB) x 1 for WWAN option, 2 x OBDII module with J1939 for option |
| Expandable Storage | 1 x CFast, 1 x 2.5" SATA SSD bay |
| Communication Module | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou), 1 x WLAN and Bluetooth combo module for optional, 1 x WWAN module for optional |
| General | Cooling System: Fanless, Enclosure: Aluminum die casting, Mounting: Support VESA 75/100, Panel and stand mounting, Three SMA Type antenna connectors of BT/Wi-Fi/WWAN, Power Input: 9 ~ 36VDC input with Ignition, Power Consumption: 26W typical, Ingress Protection: IP65 |
| LCD Panel | 12.1-inch TFT LCD panel with LED backlight, 1024 x 768 pixels (XGA), Brightness: 1300 cd/m² (typical), Contrast ratio: 600:1 (typical) |
| Touch Screen Sensor | 5-wire resistant touch, Anti-glare coating surface, Transmission rate: 81 ± 3% |
| Interface | |
| I/O Interface-Bottom | 1 x GPS Antenna SMA connector(On housing), 1 x Mic-in, 1 x Line out, 2 x USB 2.0/Ethernet (Host), 2 x LAN interface for 10/100/1000Base-T, 1 x 9 ~ 36V, 3-pin (Power, Ignition, Ground), 10A, 1 x Circle Type 22-pin Multi-I/O Connector, 1 x COM (optional RS-232/422/485; default RS-232), 1 x COM (RS-232 Tx/Rx), 1 x COM RS-232 (with either 0, 5 or 12V @ 600mA on pin9), 1 x Circle Type 10-pin CONN, 1 x OBDII module (option), 2 x DI and 2 x DO, 1 x Circle Type 6-pin CONN for 5V/12VDC-out |
| I/O Interface-Front | On screen display buttons x 5, Power on/off, Volume control (+/-), Brightness control (+/-), Light sensor, 4 x LED indicators (Power on/off, Storage, Warning, Shift), F1 ~ F10 functions key, 2 x Built-in 2W speakers |
| I/O Interface-Lateral | 1 x CFast card slot, System reset button, USB 2.0 host type A connector |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection, HW design ready for 8-level delay time on/off at user's self configuration, Power on/off ignition, software detectable, Support S4 suspend mode; wake on RTC/SMS |
| Physical Characteristics | |
| Dimensions | 340mm (W) x 262mm (H) x 75.1mm (D) (13.38" x 10.31" x 2.96") |
| Operating temperatures | Ambient with air -30°C to 60°C |
| Storage Temperature | -30°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Weight | 3.5Kg, 7.72Lb |
| Standards/Certifications | CE approval, FCC Class B, CE EN 60950-1 LVD |
| Environment | Vibration (random): 2g @5 ~ 500Hz, Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4, Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24, Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g, Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g |
| Compatible Operating Systems | |
| Operating System | WES2009, WES 7E, Win7 Pro Embedded |
