Nexcom VMC 110/111 Vehicle Computer
- CE/FCC/Emark
- Dual CAN Bus 2.0B
- Compact and fanless design
- iButton & RFID for ID identification
- Linux and Android operating system
- Wide Range DC input from 9 ~ 36V
- OBDII (ISO15765-4)/SAE J1939 protocol
- On-screen F1 ~ F5 programmable function keys
- 7" 1024 x 600 TFT LCD monitor with resistor touch screen
- ARM® Cortex®-A9 Dual-Core Processor with 1GHz frequency
- GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
- SW Utility for function demonstration on Android platform
Description
VMC 110/111, a 7-inch all-in-one mobile data terminal, targets fleet management, transportation, and logistic applications. Its compact and rugged design with flexible expansion capability is perfect for the limited space on the driver cabinet and the strong requirement for wireless communication. For wireless communication, VMC110/111 is capable of supporting GPS, Dead Reckoning, Wifi, 3G, and LTE. Besides, VMC 110/111 works on both Android and Linux operating systems, which are the mainstream operating systems in the future. 7" 1024 x 600 resolution with 500nits brightness and resistive touch is suitable on the driver cabinet. Abundant I/O support, such as 2 x CAN bus 2.0B, OBDII/J1939, RS232, RS485, USB, GPIO, and LAN… can help to get real-time vehicle information and connect with different sensors or equipment, such as ticketing machine, RFID scanner..... VMC 110/111 with Android and Linux platforms is no doubt suitable to implement into various trucks, forklifts, cranes... in port, transportation, and logistic application.
You can place an order for the Nexcom VMC 110/111 Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU & Chipset | ARM® Cortex®-A9 Processor with 1GHz frequency, Freescale Dual Core |
| Memory | On-board DDR3L 2GB |
| Storage | 1 x Micro SDHC Slot, EMMC: 8G on board |
| Expansion | 1 x half-size mini-PCIe (PCIe + USB) for WLAN, 1 x full-size mini-PCIe (USB + UART) for WWAN, OBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional), RFID (optional) |
| Touch Screen | 4-wire resistant touch, Anti-glare coating surface, Transmission rate: 80% ± 3% |
| LCD Panel | 7-inch TFT LCD Panel with LED Backlight, 1024 x 600 pixels, Brightness: 500 cd/m² (typical), Contrast ratio: 800:1 (typical), Viewing angle: 150(H), 145(V) |
| Mechanical | Cooling System: Fanless, Enclosure: Plastic PC/ABS + Metal heat-sink, Mounting: VESA 75/100 & Desktop mounting, Ingress Protection: Front panel IP54 |
| Interface | |
| I/O Interface-Front | F1 ~ F5 programmable function keys, Light Sensor, Internal Mic-in, 2 x Built-in 2W speakers, 3 x LED indicators (Power, Storage and WWAN) |
| I/O Interface-Lateral | Right side - 1 x SIM card slot, - 1 x Micro SD card slot, - 1 x USB 2.0 type A, - 1 x micro USB OTG for maintenance, Left side - 1 x Power button, - 1 x Volume up/down, - 1 x Brightness up/down, - 1 x System reset button |
| I/O Interface-Rear/Bottom | 1 x lockable power input with ignition, 1 x RJ45 for LAN, 2 x USB 2.0 Type A, - DB-15 connector, - Full RS-232, - RS-232/485, - CAN1 2.0B, DB-15 connector, - GPI x 3, Sink type: 5VDC TTL (default), Source type: 3 ~ 28VDC, - GPO x 3, Sink type: 5VDC TTL (default), max current: 20mA, Source type: 3 ~, 28VDC, max. current: 150mA, - GPS DR (Speed, direction, GND), - CAN2 2.0B (Default) & (BOM optonal for OBD II (ISO 15765-4 & J1939)), - iButton, 1 x Mic-in, 1 x Line-out, 3 x Antenna on I/O, - Rear: 1 x GPS, 1 x WWAN, - Bottom: 1 x GPS, 2 x WWAN, 2 x Antenna on housing for Wi-Fi |
| Power Requirement | |
| Power Management | 9V~36V DC input, Selectable boot-up & shut-down voltage, Ignition: 8-level delay time on/off, Reverse protection/over-voltage protection/low-voltage protection, Wake up by SMS/RTC/ignition |
| Physical Characteristics | |
| Dimensions | 212.9mm (W) x 144.97mm (H) x 40mm (D)(8.4" x 5.7" x 1.6") |
| Operating temperatures | Ambient with air -20°C to 70°C |
| Storage Temperature | -30°C to 80°C |
| Humidity | 10% to 90% (non-condensing) |
| Weight | 1.3kg |
| Standards/Certifications | CE/FCC class B/E-Mark |
| Environment | Vibration test: IEC 60068-2-64, 2.5G, Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4, Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24, MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g, Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g |
| Compatible Operating Systems | |
| Operating System | Linux YOCTO 2.0 by Request, Android 5.1 |
