Nexcom VMC 1100 Vehicle Computer
- CE/FCC/EMark
- 7" WVGA TFT LCD Monitor with resistive touchscreen
- Built-in Intel Atom® Dual Core E3825 1.33GHz
- Compact and fanless design
- On-screen programmable F1 ~ F5 function keys
- Support GPS/WWAN tracker function for car-safety
- RFID for ID identification
- Built-in GPS (Option: Dead Reckoning Support)
- GPS/WLAN/WWAN for wireless communication
- Dual CAN bus 2.0B and optional OBDII (SAE J1939) for car diagnostic
- Wide Range DC input from 9 ~ 36V
- Military standard for vibration and shock
- SAE J1113, ISO7637-2 and SAE J1455 conformity for power design
Description
VMC 1100, a new generation 7-inch vehicle mount computer with a dual-core Intel Atom® processor, is designed for transportation and harbor applications requiring real-time vehicle tracking and job dispatching. For real-time communication between the driver and the central control room, VMC 1100 provides the capability of a wireless connection from GPS, and WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN connections. Dual CANBus 2.0B (OBDII and J1939 protocol analog input), and PWM are able to help to receive car status more quickly and correctly. Due to the unique features above, VMC 1100 is perfect to use in harbor applications from container trucks, forklifts, and container stackers...
You can place an order for the Nexcom VMC 1100 Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
CPU & Chipset | Intel® Atom™ Dual Core E3825 1.33GHz |
Memory | One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB), - Default 2GB |
Expansion | 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option, 1 x mini-PCIe socket ((USB + UART) for WWAN option), 1 x External module for OBD/RFID module option(UART + USB) |
Expandable Storage | 1 x SATAIII SATA DOM Slot (available option 16GB / 32GB / 64GB) |
Communication Module | 1 x u-blox NEO-M8N module, (support GPS/Gloness/QZSS/Galileo/Beidou), 1 x WLAN or Bluetooth module for optional, 1 x WWAN module for optional |
Power Design & Protection | Load dump and inductive load protection, Cold cranking protection, Transient voltage protection, Electrostatic discharge protection |
General | Cooling System: Fanless, Enclosure: Plastic PC + ABS with aluminum die casting heatsink, Mounting: Support VESA 75, stand mounting, Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS, Power Input: 9 ~ 36VDC input with Ignition, Power Consumption: 26W, Ingress Protection: Front panel IP54 |
LCD Panel | 7-inch TFT LCD Panel with LED Backlight, 800 x 480 pixels (WVGA), Brightness: 400 cd/m² (typical), Contrast ratio: 600:1 (typical) |
Touch Screen Sensor | 4-wire resistant touch, Anti-glare coating surface, Transmission rate: 78 ± 3% |
Interface | |
I/O Interface-Front | F1 ~ F5 functions key, Light Sensor, Internal Mic-in, 2 x Built-in 2W speakers, 3 x LED indicators (Power mode, Storage and WWAN status) |
I/O Interface-Rear | 1 x 5-pin Circular connector for Power/Ignition input, 1 x RJ45 for LAN, 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A), 1 x DB9 (Male) for, - RX/TX or RS-485, - 2 x CAN Bus 2.0, 1 x DB15 (Female) for, - GPS dead reckoning interface (optional), - 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI, Analog Input requirement for Voltages are measured, Channel: 8, Voltage range: 0 ~ 38V, Resolution: 8 bit, Analog Input requirement for Frequency, Speed, Square wave, Frequency signal offset voltage range: 0 ~ 15VDC, Protection: +/- 500V spike, Frequency signal duty cycle range: 10% ~ 90% |
I/O Interface-Lateral | Right side - 1 x Micro SD card socket, - 1 x SIM card socket, - 1 x USB 3.0 host type A connector, - 1 x Mic-in, Line-out, Left side - 1 x Power button, - 1 x System reset button, - Volume up/down or Brightness up/dow |
Power Requirement | |
Power Management | Selectable boot-up & shut-down voltage for low power protection, HW design ready for 8-level delay time on/off at user's self configuration, Power on/off ignition, software detectable, Support S3 and S4 suspend mode; wake on RTC and SMS |
Physical Characteristics | |
Dimensions | 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") |
Operating temperatures | Ambient with air -20°C to 60°C |
Storage Temperature | -30°C to 80°C |
Humidity | 10% to 95% (non-condensing) |
Weight | N.W: 1.3Kg, G.W: 1.6Kg |
Standards/Certifications | EMC, - CE, FCC class B, E-Mark, Power, - SAE J1113, - SAE J1455, - ISO 7637-2, Safety, - EN 60950-1 LVD |
Environment | Vibration (random): 3g @5 ~ 500Hz, Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4, Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24, Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g, Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g |
Compatible Operating Systems | |
Operating System | Windows 8 Professional, WES8, Windows 7, WES7, Linux Fedora (kernel V3.2.0) |