Easy World Automation | Nexcom NET 101-ECM EtherCAT Motion Controller

0

Nexcom NET 101-ECM EtherCAT Motion Controller

  • EtherCAT communication cycle up to 250 μs
  • Support high-level API for CiA 402 profile
  • 1 x USB 2.0 & 1 x USB 3.0
  • 2 x RS232/422/485 with 2.5KV isolation protection
  • 1 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE/Fieldbus module
  • Onboard Intel® Atom™ processor E3826 Dual Core 1.46GHz
  • 1 x DVI display output or 1x VGA converted from DVI-I
  • EtherCAT technology with NexECM, Class A EtherCAT Master

Description

Powered by Intel® Atom™ processor E3826 (formerly codenamed "Bay Trail-I"), NET 101-ECM presents an intelligent PC-based EtherCAT controller for machine automation. It integrates NEXCOM’s EtherCAT Master, NexECM, to perform real-time communication with a cycle time of up to 250 μs. NET 101-ECM also provides API for the CiA 402 profile and a built-in EtherCAT configuration tool to speed up development time for automation users.

Besides EtherCAT communication, NET 101-ECM has high integration ability with an optional mini-PCIe module and 2 x COM ports with Isolation 2.5kv protection, which makes it a flexible controller to connect with optional GbE LAN, Wi-Fi, 3.5G/4G LTE module. NET 101-ECM is a compact yet powerful controller for your EtherCAT control system.


You can place an order for the Nexcom NET 101-ECM EtherCAT Motion Controller, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Support Onboard Intel® Atom™ processor E3826 Dual Core 1.46GHz
Main Memory 1 x DDR3L 4GB RAM
Display Option 1 x DVI display output, 1 x VGA display output (converted from DVI-I to VGA adapter)
Storage Device 1 x CFast (SATA 2.0), 1 x 2.5" SSD (SATA 2.0)
Expansion Slot 1 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE
Pre-Installed Software Package Operating system: Windows Embedded Standard 7, Real-time extension, - RTX2012/RTX2016 for 32-bit OS, - RTX2014/RTX64 3.0 for 64-bit OS, EtherCAT Master: NexECM, EtherCAT configurator
EtherCAT Support Table Basic Features, - Service Commands: Support of all commands, NexECMRtx, - IRQ Field in Datagram: Use IRQ information from Slave in datagram header, NexECMRtx, - Slaves with Device Emulation: Support Slaves with and without application controller, NexECMRtx, - EtherCAT State Machine: Support of ESM special behavior, NexECMRtx, - Error Handling: Checking of network or slave errors, e.g. working counter, NexECMRtx, Process Data Exchange, - Cyclic PDO: Cyclic process data exchange, Network Configuration, - Reading ENI: Network configuration taken from ENI file, NexECMRtx, - Compare Network: Configuration Compare configured and existing network configuration during boot-up, NexECMRtx, - Explicit Device Identification: Identification used for hot connect and prevention against cable swapping, NexECMRtx, - Station Alias Addressing: Support configured station alias in slave, i.e. enable 2nd Address and use it, NexECMRtx, - Access to EEPROM: Support routines to access EEPROM via ESC register, NexECMRtx, Mailbox Support, - Support Mailbox: Main functionality for mailbox transfer, NexECMRtx, - Mailbox polling: Polling mailbox state in slaves, NexECMRtx, CAN Application Layer Over EtherCAT (CoE), - SDO Up/Download: Normal and expedited transfer, NexECMRtx, - Complete Access: Transfer the entire object (with all sub-indices) at once, NexECMRtx, Distributed Clocks, - DC: Support of distributed clock, NexECMRtx
EtherCAT Master Slave module no.: up to 64, Cycle time: up to 250μs, Synchronization Error: +/-50ns, Support CiA 402 standard protocol
Interface
I/O Interface-Front ATX power on/off switch, LEDs for power status, HDD access, battery Low, 2 x programing LEDs, 4x Tx/Rx LEDs, 1 x External CFast socket, 1 x SIM card holder, 1 x EtherCAT port, 1 x Intel® I210IT GbE LAN port, 1 x DVI-I display output, 1 x USB 3.0 (900mA per each), 1 x USB 2.0 (500mA per each), 2 x RS232/422/485 with 2.5KV isolation protection, support auto flow control, - Jumper-free setting on RS232/422/485, - Support RI function on COM2, 1 x 2-pin remote power On/Off switch, 1 x 3-pic DC input, Typical 24V DC input with +/-20% range
Power Requirements
Power Requirements Typical 24V DC input with +/-20% range, 1 x optional 24V, 60W power adapter
Physical Characteristics
Operating temperature Ambient with air flow: -20°C to 70°C with industrial grade device (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
Storage Temperature -30°C to 85°C
Dimensions 58mm (W) x 135.5mm (D) x 192.5mm (H)
Housing Aluminum and metal chassis with fanless design
Humidity 10% to 95% (non-condensing)
Shock protection - SSD: 20G, half sine, 11ms, IEC60068-2-27, - CFast: 50G, half sine, 11ms, IEC60068-2-27
Standards and Certifications CE, FCC Class A
Vibration Protection - Random: 2Grms @ 5 ~ 500Hz, IEC60068-2-64, - Sinusoidal: 2Grms @ 5 ~ 500Hz, IEC60068-2-6

related products