Description
IWF 504D is an IP55 outdoor cost-effective AP/CPE router. IWF 504D is dual radios AP/CPE with IEEE802.11ac+b/g/n 2x2 MIMO with high RF power solution.
The maximum data rate is up to 867+300Mbps with an external antenna which by customer is selectable for high gain in long-distance transmission. IWF 504D also design as high power solution, up to 27dBm in both 2.4GHz and 5GHz.
You can place an order for the Nexcom IWF 504D Outdoor Radio, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| Hardware | WAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1, LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1, Compliant with : IEEE802.3/802.3u, Hardware based 10/100/1000, full/half, flow control auto negotiation, Push buttons: 1 x reset, LED: 1 x power & status; 1 x WAN; 1 x Wi-Fi, SMA: 4 x with RP-SMA connectors |
| Operating Mode | AP, AP router, Client router, Client bridge, WDS |
| Built-in Servers & Client Interfaces to Other Services | DHCP client, SNMP v1/v2c client (coming soon) |
| Wireless Radio | 1 x IEEE 802.11ac 2x2 MIMO, 1 x IEEE 802.11b/g/n 2x2 MIMO |
| RF Output Power : IEEE 802.11 b/g/n (±2dBm) | IEEE802.11b, 27dBm@1M, 24dBm@11M, IEEE802.11g, 27dBm@6M, 24dBm@54M, IEEE802.11g/n HT20, 23dBm@MCS0/8, 19dBm@MCS7/15, IEEE802.11g/n HT40, 22dBm@MCS0/8, 18dBm@MCS7/15 |
| Receive Sensitivity : IEEE 802.11 b/g/n | IEEE802.11b, -93dBm@1M, -91dBm@11M, IEEE802.11g, -94dBm@6M, -80dBm@54M, IEEE802.11g/n HT20, -94dBm@MCS0/8, -77dBm@MCS7/15, IEEE802.11g/n HT40, -89dBm@MCS0/8, -73dBm@MCS7/15 |
| Frequency Ranges | USA : 2.400~2.483 GHz, 5.15~5.35 GHz, 5.5~5.7 GHz, 5.725~5.825 GHz, Europe: 2.400~2.483 GHz, 5.15~5.35 GHz, 5.47~5.725 GHz, Japan: 2.400~2.497 GHz, 5.15~5.35 GHz, 5.47~5.725 GHz, China: 2.400~2.483 GHz, 5.725~5.85 GHz |
| System Management | Web-based administration, SNMP V1/V2c; NEXCOM private MIB, SYSLOG information support, Statistic, Configuration backup and restore, One-button-click to restore factory default setting, Firmware upgrade, Telnet (SSH), Support nCare management system |
| RF Output Power : IEEE 802.11ac/an/a (±2dBm) | IEEE802.11a, 27dB, 24dBm@54M, IEEE802.11a/n HT20, 27dBm@MCS0, 24dBm@MCS7, 23dBm@MCS8 in VHT20, IEEE802.11a/n HT40, 26dBm@MCS0, 23dBm@MCS7, 22dBm@MCS8 in VHT40, IEEE802.11ac VHT 80Mhz, 24dBm@MCS0, 22dBm@MCS7, 21dBm@MCS8 |
| Receive Sensitivity : IEEE 802.11ac/an/a | IEEE802.11a, -95dBm@6M, -80dBm@54M, IEEE802.11a/n HT20, -95dBm@MCS0, -76dBm@MCS7, -72dBm@MCS8 in VHT20, IEEE802.11a/n HT40, -92dBm@MCS0, -75dBm@MCS7, -71dBm@MCS8 in VHT40, IEEE802.11ac VHT 80Mhz, -90dBm@MCS0, -72dBm@MCS7, -68dBm@MCS8 |
| Power Requirement | |
| Power Requirements | 12~24VDC passive PoE |
| Physical Characteristics | |
| Weight | 442g |
| Dimensions | 240 x 135 x 58 mm |
| Operating temperature | -35~75°C |
| Storage temperature | -40~80°C |
| Humidity | 0% to 95% maximum (non-condensing) |
| Vibration Protection | random 0.3gDHCP client, SNMP v1/v2c client (coming soon) |
| Mounting | Wall/Pole mountable |
| Standards and Certifications | FCC, CE, RoHS compliant |
| Security | |
| Security | WEP, WAP/WPA2 mixed, WPA2-personal (PSK+CCMP/AES), Hidden ESSID support, MAC address filtering (MAC ACL), Station isolation |
| Package Checklist | |
| Package Contents | IWF 504D unit x 1, 24V PoE injector, Steel clamps*2 for pole mount, QIG |
