Description
IWF 503 is an IP55 outdoor cost-effective AP/CPE router. IWF 503 is single radio AP/CPE with IEEE802.11ac/an/a 3x3 MIMO with a high RF power solution.
The maximum data rate is up to 1.3Gbps with two SKUs for internal patch antenna (IWF 503) and external antenna (IWF 503D) by customer selectable for high gain in long-distance transmission. IWF 503 also design as a high-power solution, up to 27dBm in 5GHz.
You can place an order for the Nexcom IWF 503 Outdoor Radio, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| Hardware | WAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1, LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1, Compliant with : IEEE802.3 / 802.3u, Hardware based 10/100/1000, full/half, flow control auto negotiation, Push buttons: 1x Reset, LED: 1x Power& Status; 1x WAN; 1x Wi-Fi, SMA: 3x with RP-SMA connectors |
| Operating Mode | A P, Client bridge, A P router, Client router, WDS |
| Built-in Servers & Client Interfaces to Other Services | DHCP client, SNMP v1/v2c client |
| Wireless Radio | 1x IEEE 802.11ac/an/a 3x3 MIMO |
| Frequency Ranges | USA: 5.15~5.35 GHz, 5.5~ 5.7 GHz, 5.725~5.825 GHz, Europe: 5.15~5.35 GHz, 5.47~5.725 GHz, Japan: 5.15~5.35 GHz, 5.47~5.725 GHz, China: 5.725~5.85 GHz |
| System Management | Web-based administration, SNMP V1/V2c, Provides event log, SYSLOG information support, Statistics, Configuration backup and restore, One-button-click to restore factory default setting, Firmware upgrade, WES |
| RF Output Power : IEEE 802.11ac | IEEE802.11a, 27dBm@6M, 25dBm@54M, IEEE802.11ac/n HT20, 25dBm@MCS0, 23dBm@MCS9, IEEE802.11ac/n HT40, 25dBm@MCS0, 23dBm@MCS9, IEEE802.11ac/n HT80, 25dBm@MCS0, 23dBm@MCS9 |
| Receive Sensitivity : IEEE 802.11ac | IEEE802.11a, -95dBm@6M, -77dBm@54M, IEEE802.11ac/n HT20, -82dBm@MCS0, -71dBm@MCS7, -70dBm@MCS8, IEEE802.11ac/n HT40, -92dBm@MCS0, -72dBm@MCS7, -66dBm@MCS9, IEEE802.11ac/n HT80, -88dBm@MCS0, -68dBm@MCS7, -62dBm@MCS9 |
| Power Requirement | |
| Power Requirements | 24VDC Passive PoE |
| Physical Characteristics | |
| Weight | TBD |
| Dimensions | 240x135x58 mm |
| Operating temperature | -35~75°C |
| Storage temperature | -40~80°C |
| Humidity | 0% to 95% maximum (Non-condensing) |
| Vibration Protection | Vibration: random 0.3g |
| Mounting | Wall/Pole mountable |
| Standards and Certifications | FCC, CE, RoHS compliant |
| Security | |
| Security | WEP(64/128/152), WAP/WPA2 Mixed, WPA2-personal (PSK+CCMP/AES), WPA2- enterprise (802.1X certification), Hidden ESSID support, MAC address filtering (MAC ACL), Station isolation |
| Package Checklist | |
| Package Contents | IWF503 unit x1, 24V PoE injector, Steel clamps*2 for pole mount, QIG |
