Nexcom NBP 14P12 PICMG 1.0-1.3 BackPlane
- Follows PICMG 1.0 Mount Holes and Compatible with standard 4U Chassis
- Supports 1 x ISA / 12 x PCI
- PCI Compliant with the following Specification
- Three 5V 32bit PCI slots for full-size boards on the Primary bus.
- 5V/3.3V 32-bit PCI slots for full-size boards on the secondary bus
- Supports PCI Local Bus Specification Revision 2.2, Advanced Configuration
- Power Interface(ACPI), PCI Power Management Revision 1.0
- Power Connector Supports
- 24 PIN ATX Power connector
- 8 PIN AUX Standard Power connector
- 6 PIN ATX +3.3V Power connector
- Support ±12V, 5V, 3.3V Power Connector
- Compliance with PICMG 1.0 Full-size SBC
Description
The NBP 14P12 is a PICMG 1.0 15-slot backplane for 4U chassis with 1 SHB slot, 2 PICMG1.0 Slot, 1 x ISA, and 12 x PCI.
You can place an order for the Nexcom NBP 14P12 PICMG 1.0-1.3 BackPlane, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| System Architecture | 15-slot backplane |
| Slots | 3 x PICMG 1.0 (SHB slot), 1 x ISA, 12 x PCI |
| I/O Interface | - |
| Power Requirements | |
| Power Input | ATX Standard Power connector: BTX24-pin, Support+12V Standard Power Connector: ATX +12V 4PIN x 2 |
| Physical Characteristics | |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -20°C to 80°C |
| Relative humidity | Operating 10% to 90%, non-condensing, Non-operating 5% to 95%, non-condensing |
| Dimensions | 317mm (L) x 257mm (W) |
| Standards and Certifications | CE approval, FCC Class A |
