Nexcom NBP 14282 PICMG 1.0-1.3 BackPlane
- Greater Powers Delivery Capability, Supports High-Performance system Host Board and Add-on Card
- Follows PICMG 1.3 Mount Holes and Compatible with standard 4U Chassis
- Supports PCIe-8 x 1/ PCIe-4 x 1/ 32-bit PCI x 2/ PCI-X x8
- Power Connector Supports
- 24PINATX Power connector
- Support AUXStandard Power connector
- Support +12V, 12V, 5V, 3.3V Power Connector
- Compliance with PICMG 1.3 Full-size SBC
Description
The NBP 14282 is a PICMG 1.3 13-slot backplane for 4U chassis with 1 SHB Slot, 1 x PCIEx 8, 1 x PCIE x4, 2 x PCI 32-bit and 8 x PCI-X.
You can place an order for the Nexcom NBP 14282 PICMG 1.0-1.3 BackPlane, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| System Architecture | 13-slot backplane |
| Slots | 1 x PICMG 1.3 (SHB slot), 1 x PCIe x8, 1 x PCIe x4, 2 x 32-bit PCI, 8 x PCI-X |
| I/O Interface | 2 x USB 2.0 with 2 x 9 pin-header, 2 x SATA |
| Power Requirements | |
| Power Input | ATX Standard Power connector: BTX24-pin, Support+12V Standard Power Connector: ATX +12V 4PIN x 2 |
| Physical Characteristics | |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -20°C to 80°C |
| Relative humidity | Operating 10% to 90%, non-condensing, Non-operating 5% to 95%, non-condensing |
| Dimensions | 317mm (L) x 327mm (W) |
| Standards and Certifications | CE approval, FCC Class A |
