Nexcom NBP 0513 PICMG 1.0-1.3 BackPlane
- Greater Powers Delivery Capability, Supports High-Performance system Host Board and Add-on Card
- Follows PICMG 1.3 Mount Holes
- Supports 1 x PCIe x16/ 3 x PCI
- Power Connector Supports
- ATX Standard Power connector: Max 5A for 20-pin
- -Support AT Standard Power connector: Max 5A for 12-pin
- -Support +12V, 12V, 5V, 3.3V Power Connector
- Compliance with PICMG 1.3 Full-size SBC
Description
The NBP 0513 is a PICMG 1.3 backplane with SHB slot, 3 x PCI slots, 1 PCIe x 16.
You can place an order for the Nexcom NBP 0513 PICMG 1.0-1.3 BackPlane, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| System Architecture | 2U (Butterfly) backplane |
| Slots | 1 x PICMG 1.3 (SHB slot), 4 x PCI 32bit/33Mhz (3 x Full-Sized/1 x Half-Sized supported) |
| I/O Interface | 4 x USB2.0 with 2 x 9pin header, 2 x SATA, 1 x IPMI, 1 x SMBUS, 1 x Wake-up, 4 x 3pins FAN, 1 x 6 pin JST NEXCOM Defined front I/O Connector in 90°C, for Power LED Connector/Power Switch/Reset Button connector |
| Power Requirements | |
| Power Input | 1 x 24pins power connector |
| Physical Characteristics | |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -20°C to 80°C |
| Relative humidity | Operating 10% to 90%, non-condensing, Non-operating 5% to 95%, non-condensing |
| Dimensions | 331mm (L) x 84mm (W) (13.0" x 3.3") |
| Standards and Certifications | CE approval, FCC class A |
