Easy World Automation | Nexcom NEX 607 Mini-ITX MB

0

Nexcom NEX 607 Mini-ITX MB

  • 2nd generation Intel® Core™ processor family
  • Intel® QM67 chipset
  • Two 204-pin SO-DIMM socket supports up to 8 GB DDR3 1066/1333 MHz SDRAM
  • Display: VGA & DVI-D & HDMI & LVDS (2 x DF13 20-pin 18/24/36/48-bit dual channel)
  • 1x mini-PCIe, 1x PCIe x16 slot
  • 2x Intel® Gigabit Ethernet
  • 4x SATA
  • 10x USB, 4-in/4-out GPIO, Mic-in, Line-out
  • Serial port: 3x RS232, 1x RS232/422/485 port
  • Support AT/ATX mode and single +12 Vdc input

Description

The NEX 607 is a Mini-iTX board with a 2nd generation Intel® Core™ processor family, which supports DDR3 1066/1333 memory and is equipped with an integrated graphics controller, Intel® HD Graphics 3000. It makes NEX 607 an ideal multimedia solution for large, multi-display applications. Geared with Intel® QM67 chipset, NEX 607 also provides four SATA, four serial ports, ten USB2.0 ports, two Gigabit Ethernet LAN ports, one PCIex16 slot, one Mini-PCIe interface for applications.


You can place an order for the Nexcom NEX 607 Mini-ITX MB, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Support 2nd generation Intel® Core™ processor family
Main Memory Two 204-pin SO-DIMM socket supports up to 8 GB DDR3 1066/1333MHz SDRAM Chipset
Chipset Intel® QM67 chipset
BIOS AMI BIOS, Plug & play support, Advanced power management, Advanced configuration & power interface
On-board LAN 2 x Intel® PCI Express Gigabit Ethernet, Support Boot From LAN (PXE), 2 x RJ45 with LED
Display 2nd generation Intel® Core™ processor integrated Intel® HD Graphics 3000 engine. Intel® HD Graphics concluding high-performance graphics and media processing is built in the processor, which is capable of delivering sophisticated graphics for large, multi-display applications. Analog VGA interface: 1 x VGA connector Resolution up to 2048 x 1536 75Hz, DVI interface: 1 x DVI-I connector Resolution up to 1920 x 1200, HDMI interface: 1 x HDMI connector, LVDS1 interface: Dual LVDS panel, 2 x DF13 20-pin LVDS connector for internal connection, LVDS2 interface (option, Through SDVO w/ CH7308): Dual LVDS panel, 2 x DF13 20-pin LVDS connector for internal connection, CCFL interface: 2 x CCFL for LCD Panel Backlight Inverter
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage 4 x SATA port
System Monitor Monitoring of 4 voltages and 2 temperatures and 2 fan speed detection, 4 voltages (Vcore, +12V, +3.3V, 5V), 2 temperatures (CPU, System), 2 fan speed detection
On-board RTC On-chip RTC with battery backup, 1 x External Li-Ion battery
Power Requirements
Power +12V DC input (One 4-pin power connector)
Physical Characteristics
Dimensions Mini-ITX M/B form factor, 170mm (L) x 170mm (W)
Operating temperature -15°C to 60°C
Storage temperature -20°C to 85°C
Relative humidity operating 10% to 90%, non-condensing
Standards and Certifications CE approval, FCC Class A

related products