Easy World Automation | Nexcom NViS 2310 Mobile NVR

0

Nexcom NViS 2310 Mobile NVR

  • Intel® Atom™ processor quad-core E3845, 1.91GHz
  • Three SIM cards + dual WWAN modules support
  • Built-in U-blox UBX-G6010 GPS, optional Dead Reckoning support
  • Built-in CAN Bus 2.0B. Optional OBDII function (SAE J1939/J1708)
  • Wake on RTC/SMS via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe sockets expansion
  • Programmable 8 x GPIO
  • Voice communication via WWAN module

Description

NViS 2310 features based on Intel® Core™ quad core processor E3845 (1.91GHz),Its CPU performance gives the users the ability to adapt to what they need in any Surveillance applications. Its Intel® HD graphics engine allows users to fully take advantage of NViS 2310 providing a wide variety of display I/O configurations of 2 different video outputs (VGA, DP). NViS 2310 is not only suitable for video surveillance application, It allows NViS 2310 to comply with stringent MIL-STD-810G military standard in rugged, fanless and compact mechanism. NViS 2310 providescomplete communication capability between automotive and computer with built-in CAN BUS 2.0B interface. Optional OBDII interface (J1939/J1908) is also available for vehicle diagnostics. NViS 2310 features rich PAN, WLAN and WWAN wireless connectivity. With dual SIM cards support, NViS 2310 allows three SIM cards backup each other for a better connectivity quality by software. In addition, three SIM cards and dual WWAN modules architecture can increase the bandwidth for a faster data transmission speed. Not only data transmission, NViS 2310 also supports two-way voice communication. Equipped with intelligent power management, NViS 2310 can be waked on by ignition, RTC timer or SMS message remotely. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, NViS 2310 keeps the flexibility to meet the demand for different telematics applications, such as infotainment, fleet management, dispatching system and video surveillance.


You can place an order for the Nexcom NViS 2310 Mobile NVR, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interface
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN, 2 x Externally accessible SIM card socket (selectable), 1 x Phone jack 3.5mm for 1 x MIC-in, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray, 1 x Externally accessible CFast card socket with cover, 1 x Event button (trigger type), 1 x Reset button, 1 x Type A USB 3.0 compliant host, supporting system boot up, 4 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear 1 x 9 ~ 36VDC input with Ignition, 2 x Type A USB 2.0 compliant host, supporting system boot up, 2 x RJ45 10/100/1000 Fast Ethernet with LED, 1 x Phone jack 3.5mm for 1 x MIC-in, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, 1 x DP port, resolution up to 2560 x 1600 @60H, 1 x Antenna hole for GPS, 2 x DB-9 RS232 (RI/5V/12V selectable), 1 x DB-9 RS422/485, 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO, 1 x 16-pin terminal block, 1 x CAN Bus 2.0B (on board), 1 x Optional OBDII module (ASE J1939 or J1708), 8 x GPIO (Programmable Digital Input or optional isolation) (Digital Input) Input voltage (internal type): 5VDC TTL (default) Input voltage (source type): 3 ~ 12VDC (Programmable Digital Output or optional isolation) (Digital Output) Digital output (sink type): 5VDC TTL (default), max. current: 20mA Digital output (source type): 3 ~ 24VDC, max. current: 150mA, 1 x 12VDC output (2A), SM Bus
Power Requirements
Power Requirement Selectable boot-up & shut-down voltage for low power protection by software, Setting 8-level power on/off delay time by software, Status of ignition and low voltage can be detected by software, Support S3/S4 suspend mode
General
Main Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB (default built-in 4GB)
CPU Support Intel® Atom™ processor quad core E3845, 1.91GHz
Storage Device 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available), 1 x CFast (externally accessible)
Expansion Slot 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Physical Characteristics
Dimensions 260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97")
Operating temperature -30°C ~ 70°C (SSD)
Storage Temperature -35°C ~ 85°C
Standards and Certifications CE approval, FCC Class B, E13 Mark, Shock (SSD/HDD), Vibration (random), Vibration (SSD/HDD)
Humidity 10% ~ 90% (non-condensing)

related products