MOXA VPort 464-T Video Servers
- 4-Channel analog video input
- 2 x 10/100BaseT(X) Ports (RJ45 connector)
- 12/24 VDC, 24 VAC Redundant dual power inputs
- 4 x BNC Video inputs (1.0 Vpp, 75 ohm)
- 1 x Audio input (line-in) and 1 x Audio output (line-out)
- Metal body design
- DIN-rail or Panel mounting
- -40 to 75°C operating temperature
Description
The VPort 464 4-channel industrial video encoder uses the
H.264 video compression algorithm to provide the best video quality on the
market but with a smaller bandwidth requirement than other video compression
standards. In addition, to meet various requirements, each channel of the VPort
464 can support 2 video streams simultaneously or you can merge all 4 channels
into 1 quad view stream using H.264 and MJPEG compression formats, providing
greater flexibility for a variety of uses, including viewing, recording, and
analysis. The rugged industrial design, which includes a -40 to 75°C operating
temperature, IP30 protection, and industrial certifications, makes the VPort
464 suitable for harsh environments.
The VPort 464 comes with two Gigabit Ethernet ports and
supports cascade mode and network redundancy. In addition, Moxa’s innovative
DynaStream™ technology lets you change the video frame rate automatically,
allowing you to control your network bandwidth budget and simplify network
system management. The CBR Pro™ function guarantees the lowest packet loss for
limited bandwidth transmissions to ensure that images will not exhibit the
mosaic effect.
You can also find the VPort 464 model in the Video Servers.
Easy World Automation offers the easiest way to buy the MOXA
VPort 464-T Video Servers in the Middle East (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman) at the lowest price through online inquiring. Our sales
experts will contact you to fulfill all your industrial automation needs.
Specification
| Interface | |
|---|---|
| 10/100BaseT(X) Ports (RJ45 connector) | 2 Ports |
| Relay Channels | 2 x Channels (max. 24 VDC @ 1 A) |
| Digital Inputs | 4 x Channels: +13 to +30 V for state 1, -30 to +1 V for state 0, Max. input current: 8 mA (Terminal block connector) |
| Video | |
| Video Inputs | 4, BNC connector (1.0 Vpp, 75 ohm) |
| Video Output | Via Ethernet |
| Video Compression | H.264 (ISO/IEC 14496-10) or MJPEG |
| Video Streams | 2 independent H.264 or MJPEG video streams, 1 quad (4-channel images) stream |
| Video Viewing | DynaStream™ support for changing the video frame rate automatically, CBR Pro™ for good image quality in limited bandwidth transmissions, Adjustable image size and quality, Timestamp and text overlay, OSD (On Screen Display) position adjustable, Maximum of 5 simultaneous unicast connections, 50 multicast clients, Image tuning control: brightness, contrast, saturation, sharpness, noise reduction |
| Audio | |
| Audio Inputs | 1 x Line-in or mic-in with 3.5 mm phone jack |
| Audio Outputs | 1 x Line-out with 3.5 mm phone jack |
| Audio Format | Mono, PCM (G.711) |
| Network | |
| Protocols | Ethernet: TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP; Camera: Pelco D, Pelco P, Custom Camera |
| Serial Port | |
| PTZ Ports | 1 x RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps |
| COM Ports | 1 x RS-232 or 485 port, DB9 male connector, 115.2 kbps |
| Console Port | 1 x RS-232 port, RJ45 connector |
| PTZ (Pan/Tilt/Zoom) | |
| PTZ Camera Control | Via PTZ port or COM port |
| PTZ Control Functions | Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions) |
| PTZ Function Updates | Driver upload supported |
| General | |
| MTBF | 569,152 hrs |
| SD Slot | SDXC |
| LED Indicators | STAT: Indicates if system is booted up properly or not; Power 1: Power 1 on/off; Power 2: Power 2 on/off; FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network; Video: Video input signal; PTZ: Indicates if PTZ or COM port data has been transmitted; SD: Indicates if SD card was mounted successfully; Network: 10 Mbps or 100 Mbps |
| Power Requirements | |
| Power Connector | 2-pin terminal block |
| Input Voltage | 12 to 32 VDC, or 18 to 30 VAC (Redundant dual power inputs) |
| Input Current | 0.5 A @ 24 VDC, 0.83 A @ 24 VAC |
| Security | |
| Password | User level password protection |
| Filter | IP address |
| Authentication | 802.1X |
| Encryption | HTTPS |
| Alarms | |
| Intelligent Video | Camera tampering detection |
| Video Motion Detection | 3 independently configurable areas |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Custom Alarms | HTTP event servers for setting customized alarm actions |
| FTP Messaging | Automatic transfer of stored images via email or FTP as event-triggered actions |
| Pre-Alarm Buffer | 50 MB video buffer for JPEG snapshot images |
| Video Recording | Event recordings stored on the SD card |
| Physical Characteristics | |
| Housing | Metal |
| Dimensions | 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) |
| Weight | 1.13 kg (2.49 lb) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
| Standards and Certifications | EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Freefall: IEC 60068-2-31; Safety: UL 60950-1; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6; Telcordia SR332 |
| Altitude | 2000 m |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Minimum Viewing System Requirements | |
| Memory Size | 1 GB |
| System OS | Windows 7 or above |
| Browser | Internet Explorer 9.x or above |
| Multimedia | DirectX 9.0C or above |
