MOXA ioLogik E2210 Smart Ethernet Remote I/O
- 12 x Digital Input Channels (NPN), 8 x Digital Output Channels
- 1 x 10/100BaseT(X) Port (RJ45 connector)
- 1 x RS-485 Serial port (Terminal block connector)
- Plastic body design
- Supports Modbus TCP, MX-AOPC, and SNMP v1/v2c
- 12 to 36 VDC input power range
- DIN-rail and Wall mounting
- -10 to 60°C operating temperature
- Brand: MOXA
- Product Code: ioLogik E2210
Description
Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
You can also find the ioLogik E2240-T, ioLogik E2214,
ioLogik E2242-T, and ioLogik E2262 models in the
Enjoy the ease of online
inquiries for the MOXA ioLogik E2210 Smart Ethernet Remote I/O. You can submit your inquiry on our website and get the
most friendly communication with our experts to choose high-quality industrial
automation products at a reasonable price from our Middle East branches (UAE
(Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| Digital Input and Output | : 12 x Digital Input Channels (Wet Contact: NPN, Dry Contact) and 8 x Digital Outputs Channels |
| Adjustable digital input and output | |
| Analog Input and Output | |
| Relays | |
| Thermal sensor input (RTD) | |
| Thermocouple input | |
| LAN | : 1 x 10/100BaseT(X) Port (RJ45 connector) |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Serial port | : 1 Port |
| Isolation | : 3k VDC or 2k Vrms |
| Buttons | Reset button |
| Serial Interface | |
| Connector | Terminal block |
| Serial Standards | RS-485 |
| Serial Communication Parameters | Baudrate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps; Parity: None; Data Bits: 8; Stop Bits: 1; Flow Control: None |
| Serial Signals | RS-485-2w: Data+, Data-, GND |
| Security | |
| Security Functions | Authentication: Local database; Encryption: HMAC; Security Protocols: SNMPv3 |
| Standards and protocols | |
| Protocols | Ethernet: Modbus TCP Server (Slave), SNMPv1/v2c/v3, SNMPv1 Trap, Moxa AOPC (Active Tag), MXIO Library, CGI commands; Serial: Modbus RTU Master |
| General | |
| Compatible Softwares | MX-AOPC UA Server, MXIO |
| Management | BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP |
| MTBF | 213,673 hrs |
| Power Requirements | |
| Power Connector | Screw-fastened Euroblock terminal |
| Input Voltage | 12 to 36 VDC |
| Power Consumption | 202 mA @ 24 VDC |
| LED Indicators | |
| LED Indicators | PWR, RDY, Serial, I/O Status |
| Physical Characteristics | |
| Housing | Plastic |
| Dimensions | 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) |
| Standards and Certifications | Safety: UL 508; EMC: EN 61000-6-2/-6-4; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6; Freefall: IEC 60068-2-32; Green Product: RoHS, CRoHS, WEEE; Telcordia SR332 |
| Installation | DIN-rail mounting, Wall mounting |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5% to %95 Non-condensing |
| Weight | 250 g (0.55 lb) |
| Altitude | 2000 m |
