MOXA ioPAC 8600-CPU30-M12-C-T Modular Programmable Controller
- Modular CPU/power/backplane design that supports 85M/86M modules
- Tag-centric design with ready-to-run services
- Supports C/C++ and IEC 61131-3 programming languages
- Compact, lightweight design
- Supports a redundant power module with dual power inputs
Description
The ioPAC 8600 Series modular programmable controllers are
100% modular, giving you the freedom to choose the CPU, power, backplane,
communication, and I/O modules you need for your application. In addition, the
ioPAC 8600 enhances the hardware system architecture and key features of the
ioPAC 8020 and ioPAC 8500 combined and has an Ethernet bus on the backplane to
support Ethernet switch modules. The ioPAC 8600 supports the C/C++ and IEC
61131-3 programming languages and ready-to-run services, including Modbus TCP/RTU,
SNMP, data logging, and email alarms to fulfill different customer
requirements. With active tag and MX-AOPC UA Suite data integration software,
the ioPAC 8600 Series provides a comprehensive solution for data acquisition
and control applications in harsh environments.
Moxa’s ioPAC 8600-CPU30 module is equipped with a new 1 GHz
high-performance Cortex™ A8 CPU, which shortens the cycle time significantly and allows users to run more programs simultaneously. The real-time Linux OS
also provides better controllability, reducing jitter to only 10% of the jitter
experienced by the CPU10 module. With the CPU30 module’s 4 GB eMMC, the ioPAC
8600 can support more communication protocols for a wider range of scenarios,
including a RESTful API for railway IIoT applications and DNP3 outstations2 for
oil and gas applications. The CPU30 also reserves up to 1.7 GB of internal
storage which gives users the freedom to develop more complex programs for
specific ioPAC applications. As an added bonus, users can develop programs
directly on the ioPAC.
Moxa’s ioPAC 8600 programmable controllers use a tag-centric design with ready-to-run services. The tag-centric design helps streamline the connection between the ioPAC 8600 controller and remote I/Os and allows you to easily manage I/O status by implementing get/set routines to read-from/write-to tag values, even if you are not particularly familiar with PLC FBDs and APIs. The ready-to-run service allows programmers to rapidly configure services (SNMP, Modbus RTU/TCP, email alarms, etc.) without writing a single line of code, reducing the development of complicated communication applications to a few mouse clicks. The ioPAC 8600’s tag-centric design and ready-to-run service greatly increase an engineer’s productivity.
You can also find the ioPAC 8600-BM009-T, ioPAC8600-CPU30-RJ45-C-T, and ioPAC 8600-CPU30-M12-IEC-T models in the Smart Remote I/O.
Discover industrial automation
solutions appropriate to your needs, and easily
inquire about the MOXA ioPAC 8600-CPU30-M12-C-T Modular Programmable Controller through our user-friendly website via one of our Middle
East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
COMPUTER | |
---|---|
CPU | 32-bit Cortex-A8 1GHz |
OS | Real-time Linux (PREEMPT_RT) |
Clock | Real-time clock with battery backup |
RAM | 512 MB DDR3(L) |
MicroSD Slot | |
CONTROL LOGIC | |
Language | C/C++ |
ETHERNET INTERFACE | |
LAN Ports | 2 x 10/100BaseT(X) Ports (M12 D-coded 4-pin female connector) |
Magnetic Isolation Protection | 1.5 kV (built-in) |
SERIAL INTERFACE | |
No. of Ports | 1 x RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1) |
Serial Standards | RS-232 |
POWER REQUIREMENTS | |
Input Voltage | 24 to 110 VDC |
Power Consumption | 223 mA @ 24 VDC |
Power Connector | Spring-type Euroblock terminal |
GENERAL | |
MTBF | 1,358,656 hrs |
Standards and Certifications | EMC, EMI, EMS, EN 50121-4, EN 50155, Safety, Shock, Vibration |
Supported Protocols | Modbus TCP Client (Master), Modbus TCP Server (Slave), Moxa AOPC (Active Tag), SNMPv1/v2c Trap, SNMPv1/v2c/v3, BOOTP, IPv4, SMTP, UDP, TCP/IP |
PHYSICAL CHARACTERISTICS | |
Housing | Metal |
Dimensions | 205.65 x 133.35 x 100 mm (8.1 x 5.25 x 3.94 in) |
Weight | 2,56kg (5.64 lb) |
Installation | Wall mounting (with optional kit) |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |