MOXA NPort Z2150-T Serial to Zigbee Converter
- Serial to ZigBee Converter
- 1 x RS-232/422/485 Serial port (DB9 male)
- 12 to 48 VDC input power range
- IEEE 802.15.4/ZigBee compliant
- DIN-rail and Wall mounting
- IP30-rated Aluminium body design
- -40 to 75°C operating temperature
.png)
Description
The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. A user-friendly utility is provided to configure the device type and network settings in a few simple steps.
End of Life Product - No Replacement
Please note that the NPort Z2150/Z3150 Series has been phased out. You can explore the NPort W2150A/W2250A Series in the Serial-to-Ethernet Converters.
Easy World Automation offers the easiest way to buy the MOXA
NPort Z2150-T Serial to Zigbee Converter in the Middle East (UAE (Dubai), KSA
(Al Khobar, Riyadh), and Oman) at the lowest price through online inquiring.
Our sales experts will contact you to fulfill all your industrial automation
needs.
Specification
| ZigBee Interface | |
|---|---|
| RF Standard | 802.15.4/ZigBee compliant |
| Frequency Band | 2.4 GHz |
| RF Data Rate | 250 kbps |
| Rx sensitivity | -96 dBm |
| Tx Power | 4.5 dBm (Max) |
| Transmission Distance | Up to 100 m (open space) |
| Antenna | External 2 dBi |
| RF Channel | 16 channels |
| Device Type | Coordinator, Router, End Device |
| Network Topology | Star, Mesh, Cluster tree |
| Security | 128-bit AES encryption algorithms |
| Ethernet Interface | |
| 10/100Mbps Ports | |
| Magnetic Isolation Protection | |
| Hardware | |
| DIP Switch | Console/Operation Mode |
| SW1 | Pull high/low resister, Termination for RS-422/485. |
| Reset Button | Reset to default |
| Serial Interface | |
| Number of Ports | 1 Port |
| Serial Standards | RS-232/422/485 |
| Connector | DB9 male |
| Serial Communication Parameters | |
| Data Bits | 8 |
| Stop Bits | 1, 2 |
| Parity | None, Even, Odd |
| Flow Control | None, RTS/CTS |
| Baudrate | 50 bps to 230.4 kbps |
| Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w | Data+, Data-, GND |
| Software | |
| Windows Real COM Drivers | - |
| Configuration | ZigBee Configuration Utility |
| Firmware Upgrade | ZigBee Configuration Utility |
| Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | 45 mA @ 12 V |
| General | |
| MTBF | 2,542,774 hrs |
| Automatic Reboot Trigger | - |
| Physical Characteristics | |
| Housing | Aluminum |
| Weight | 340 g (0.75 lb) |
| Dimensions | Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in), With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Installation | DIN-rail mounting (with optional kit), Wall mounting |
| Standards and Certifications | EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 MHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIPs; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3, IEC 60068-2-14; Radio Frequency: EN 301 893, EN 300 328, EN 301 489-1/17, EN 301 489-1; Safety: IEC 60950-1; Vibration: IEC 60068-2-6; IP30; Telcordia (Bellcore), GB |
