MOXA CN2610-16 Terminal Server | Easy World Automation

MOXA CN2610-16 Terminal Server

  • LCD panel for easy IP address configuration (excluding wide-temperature range models)
  • Dual-LAN cards with two independent MAC addresses and IP addresses
  • Redundant COM function available when both LANs are active
  • Dual-host redundancy can be used to add a backup PC to your system
  • Dual-AC-power inputs (for AC models only)
  • Real COM/TTY drivers for Windows and Linux
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC

  • Brand: MOXA
  • Product Code: CN2610-16

Description

Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.

Dual-LAN Redundancy

The CN2600 has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the CN2600 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.

Redundant COM

Moxa offers “Redundant COM,” an easy-to-use application to provide an alternative solution for network redundancy. When the CN2600 receives a data packet from a connected device, two identical data packets are sent over two independent LAN connections to prevent lost data packets if one LAN connection becomes unavailable. The CN2600 software is programmed to automatically discard duplicate data packets.

Dual-host Redundancy

The CN2600’s dual-LAN cards can also be used to set up “dual-host” redundancy. In this case, both networks (LAN A and LAN B in the figure) are connected to two different hosts. If either of the two hosts shuts down unexpectedly, the other host will still be able to communicate with serial devices connected to the CN2600.

Dual-AC Model Supported

Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even in the event of power circuit failures.


You can also find the CN2650I-8 and CN2650-8 models in the Serial-to-Ethernet Converters.


Explore our extensive range of industrial automation products such as MOXA CN2610-16 Terminal Server in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).  Submit your inquiry to enjoy the on-time delivery service. Our sales experts will contact you to fulfill all your industrial automation needs.

Specification

ETHERNET INTERFACE
No. of Ports 2 x 10/100BaseT(X) Ports (RJ45 connector)
SERIAL INTERFACE
Flow Control RTS/CTS, DTR/DSR, XON/XOFF, None
No. of Ports 16
Connector 8-pin RJ45
Serial Standards RS-232
Operation Modes Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Terminal mode, Reverse Telnet mode, PPP mode, DRDAS mode, Redundant COM mode, Disabled
Baudrate 50 bps to 921.6 kbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity Even, Odd, Space, Mark, None
POWER PARAMETERS
Input Current 130 mA @ 110 VAC
Input Voltage 100 to 240 VAC, 47 to 63 Hz
PHYSICAL CHARACTERISTICS
Housing Metal
Installation 19-inch rack mounting
Dimensions 480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in)
Ambient Relative Humidity 5 to 95% (non-condensing)
MTBF 639,332 hrs
Standards and Certifications EMC, EMI, EMS, Safety, Vibration, Freefall, RoHS, CRoHS, WEEE