MOXA CSM-400-1213 slide-in Ethernet-to-Fiber Media Converters
- 1 x 10/100BaseT(X) Ports (RJ45 connector)
- 1 x 100BaseFX Ports (multi-mode ST connector)
- 5 KM Typical data transmission distance on fiber
- Supports IEEE 802.3AH OAM protocol
- 12 VDC input power range
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- -20 to 55°C operating temperature range
Description
The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules convert media from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors) and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.
You can also find the CSM-400-1225-T, CSM-400-1224, and CSM-400-1218-T models in the Industrial Media Converters.
Inquire
about the MOXA CSM-400-1213 slide-in Ethernet-to-Fiber Media Converters, designed for industrial automation solutions. Feel free to get in touch with our
sales team to give you the best solutions at the best global price in the
Middle East (UAE (Dubai),
KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 1 Port |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 10/100Mb (Megabit) POE Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | : 1 Port (ST connector) |
| 1000Mb Fiber optic multi mode (Gigabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 1000Mb Fiber optic single mode (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| M12 port | |
| Alert Output | |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Standards and protocols | |
| Protocols and work standards | IEEE 802.3u for 100BaseT(X) and 100BaseFX |
| General | |
| Maximum cable length for data transfer | 5 KM |
| MTBF | 1,454,560 hrs |
| Power Requirements | |
| Input Voltage | 12 VDC |
| Input Current | 220 mA @ 12 VDC |
| Overload Current Protection | Supported |
| Type of power input | - |
| Power Consumption | 220 mA @ 12 VDC |
| Physical Characteristics | |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV(AC), 1 kV(DC); Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Safety: EN 62368-1, UL 62368-1; Vibration: IEC 60068-2-6; Telcordia (Bellcore), GB |
| Housing | - |
| Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
| Weight | 0.115kg |
| Operating Temperature | -20 to 55°C (-4 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Installation | Can be installed in any NRack System™ chassis |
