MOXA AWK-3131A-EU Wireless AP/Bridge/Client
- Supports EU Frequency Bands
- 1 x PoE Port (10/100/1000BaseT(X), RJ45 connector)
- IP30-rated Metal body design
- IEEE 802.11a/b/g/n AP/bridge/client support
- DIN-rail and Wall mounting
- 12 to 48 VDC Redundant dual inputs (48 VDC for PoE)
- -25 to 60°C operating temperature
Description
The AWK-3131A 3-in-1 industrial wireless AP/bridge/client
meets the growing need for faster data transmission speeds by supporting IEEE
802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is
compliant with industrial standards and approvals covering operating
temperature, power input voltage, surge, ESD, and vibration. The two redundant
DC power inputs increase the reliability of the power supply, and the AWK-3131A
can be powered via PoE to make deployment easier. The AWK-3131A can operate on
either the 2.4 or 5 GHz bands and is backward-compatible with existing
802.11a/b/g deployments to future-proof your wireless investments. The Wireless
add-on for the MXview network management utility visualizes the AWK's invisible
wireless connections to ensure wall-to-wall Wi-Fi connectivity.
Advanced 802.11n Industrial Wireless Solution
• 802.11a/b/g/n compliant AP/bridge/client for flexible
deployment
• Software optimized for long-distance wireless
communication with up to 1 km line of sight and external high-gain antenna
(available only on 5 GHz)
• Supports 60 clients connected concurrently
• DFS channel support allows a wider range of 5 GHz channel
selection to avoid interference from existing wireless infrastructure
Advanced Wireless Technology
• AeroMag supports error-free setup of your industrial
applications’ fundamental WLAN settings
• Seamless roaming with client-based Turbo Roaming for < 150 ms roaming recovery time between
APs (Client Mode)
• Supports AeroLink Protection for creating a redundant
wireless link (< 300 ms recovery time) between APs and their clients
Industrial Ruggedness
• Integrated antenna and power isolation designed to provide
500 V insulation protection against external electrical interference
• Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications
You can also find the AWK-3131A-EU-T, AWK-3131A-JP, and AWK-3131A-JP-T models in the WLAN AP/Bridge/Client.
Discover industrial automation solutions appropriate to your needs, and easily inquire about the MOXA AWK-3131A-EU Wireless AP/Bridge/Client through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
Interfaces | |
---|---|
10/100/1000BaseT(X) Ports | |
Modulation Type | DSSS, OFDM, MIMO-OFDM |
Frequency Band | 2.412 to 2.472 GHz (13 channels), 5.180 to 5.240 GHz (4 channels), 5.260 to 5.320 GHz (4 channels), 5.500 to 5.700 GHz (11 channels) |
PoE Ports | : 1 x Port (10/100/1000BaseT(X), RJ45 connector) |
100BaseFX Ports | |
Wireless Security | WEP encryption (64-bit and 128-bit), WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES), WPA/WPA2-Personal |
WLAN Antenna Connector | 2 x RP-SMA female |
Security | HTTPS/SSL, RADIUS, SSH |
WLAN Operation Mode | Access point, Client, Client-Router, Master, Slave, Sniffer |
WLAN Standards | 802.11a/b/g/n, 802.11i Wireless Security |
1000BaseSFP Slots | |
Transmission Rates | 802.11b: 1 to 11 Mbps, 802.11a/g: 6 to 54 Mbps, 802.11n: 6.5 to 300 Mbps |
10/100BaseT(X) Ports | |
Digital Inputs | : 2, Max. input current: 8 mA, +13 to +30 V for state 1, +3 to -30 V for state 0 |
Console Port | : 1 x RS-232 (8-pin RJ45 connector) |
Serial Ports | |
M12 Connector | |
Power Requirement | |
Input Current | 0.6 A @ 12 VDC, 0.15 A @ 48 VDC |
Connector | 1 removable 10-contact terminal block(s) |
Input Voltage | 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet |
Power Consumption | 7.2 W (max.) |
Reverse Polarity Protection | Supported |
Physical Characteristics | |
Humidity | 5 to 95% (non-condensing) |
Dimensions Packaged | 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in) |
Weight (PACKAGED) | 860 g (1.9 lb) |
Housing | Metal |
Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Standards and Certifications | EMC: EN 61000-6-2/-6-4; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 3 V, IEC 61000-4-8 PFMF; Hazardous Locations: ATEX, Class I Division 2, IECEx; Radio: EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC, RCM; Safety: EN 60950-1, UL 60950-1; Vibration: IEC 60068-2-6; IP30; Telcordia SR332 |
Operating Temperature | -25 to 60°C (-13 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
General | |
Management | DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig |
LED Indicators | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN |
MTBF | 570,854 hrs |
Time Management | SNTP Client |