Easy World Automation | Beijer BSD-L7PA001U-2 Stand alone servo drive

Beijer BSD-L7PA001U-2 Stand alone servo drive

  • Analogue +/-10V, Pulse train, I/O-table or Modbus RTU
  • Input voltage 1- or 3-phase 200-240 VAC
  • Output power 100 W
  • Output current 1.4 A
  • Motor autodetect and adapt
  • Universal encoder
  • Easy to use

  • Brand: BEIJER
  • Product Code: BSD-L7PA001U-2

Description

High-performance servo drives for synchronized multi-axis (L7NH) or standalone (L7P) movements. All models provide auto-detect and adaptation of the connected motor, various homing modes, advanced tuning with advanced filters and high-speed motion profile calculation.


You can place an order for the Beijer BSD-L7PA001U-2 Stand alone servo drive, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Communication
EtherCAT
Modbus RTU
Communication connector RJ45 (1 input, 1 output)
Input ratings
Control supply voltage 200 to 230VAC
Mains supply voltage 1- or 3-phase 200-230VAC
Overload capacity 300 % for 3 s
Supply frequency 50 to 60 Hz
Voltage fluctuations -15 to +10%
Output ratings
Rated power 100 W
Encoder
Encoder type Quadrature(Incremental) BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2 Sinusoidal, Analog Hall
Regenerative
Built-in brake resistor
Built-in brake transistor
Control specifications
Control modes Position Mode Velocity Mode Torque Mode
Frequency response Maximum 1Khz or above (when using 19-bit serial encoder)
Speed control range Maximum 1:5000
Tuning modes On line auto gain tuning Resonance filters Vibration supression
Physical Characteristics
IP Class IP20
Size 169x38x172.5 mm
Weight 1.0 kg
Environment Indoors in an area free from corrosive or combustible gases, liquids, or dust.
Humidity 90% RH or less (no condensation)
Operating Temperature 0 to 50 C°
Storage Temperature -20 to +65 C°
Safety