Beijer BSD-L7NHA001U-2 EtherCAT servo drive
- EtherCAT slave node
- Input voltage 1- or 3-phase 200-240 VAC
- Output power 100 W
- Output current 1.4 A
- Motor autodetect and adapt
- Universal encoder
- STO safety
- Brand: BEIJER
- Product Code: BSD-L7NHA001U-2
Description
High performance servo drives for synchronized multi axis (L7NH) or standalone (L7P) movements. All models provide auto detect and adaptation of the connected motor, various homing modes, advanced tuning with advanced filters and high-speed motion profile calculation.
You can place an order for the Beijer BSD-L7NHA001U-2 EtherCAT servo drive, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Communication | |
---|---|
EtherCAT | |
Modbus RTU | |
Communication connector | RJ45 (1 input, 1 output) |
DC-clock cycle time | 250 μs |
Input ratings | |
Control supply voltage | 200 to 230VAC |
Mains supply voltage | 1- or 3-phase 200-230VAC |
Overload capacity | 300 % for 3 s |
Supply frequency | 50 to 60 Hz |
Voltage fluctuations | -15 to +10% |
Output ratings | |
Rated power | 100 W |
Encoder | |
Encoder type | Quadrature(Incremental) BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2 Sinusoidal, Analog Hall |
Regenerative | |
Built-in brake resistor | |
Built-in brake transistor | |
Control specifications | |
Control modes | Profile Position Mode Profile Velocity Mode Profile Torque Mode Cyclic Synchronous Position Mode Cyclic Synchronous Velocity Mode Cyclic Synchronous Torque Mode Homing Mode |
Frequency response | Maximum 1Khz or above (when using 19-bit serial encoder) |
Speed control range | Maximum 1:5000 |
Torque control repeatibility | Within ±1% |
Tuning modes | On line auto-gain tuning Resonance filters Vibration suppression |
Control terminals | |
Analog inputs | Input voltage range : -10[V] ~ +10[V] Function : Analog torque limit Total 1 input channel (not allocable) |
Analog outputs | Total 2 input channels (allocable) |
Digital inputs | Input Voltage range : DC 12[V] ~ DC 24[V] Total 8 input channels (allocable) The listed 15 functions can be used selectively for assignment. (*POT, *NOT, *HOME, *STOP, *PCON, *GAIN2, *P_CL, *N_CL, PROBE1, PROBE2, EMG, A_RST, SVON, LVSF1, LVSF2) Note) * Basic allocation signal |
Digital transistor outputs | Signal rating: DC 24[V] ±10%, 120[㎃] Total 4 input channels (allocable) The listed 11 functions can be used selectively for assignment. (*BRAKE±, *ALARM±, *READY±, *ZSPD±, INPOS±, TLMT±, ,VLMT±, INSPD±, WARN±, TGON±, INPOS2±) Note) * Basic allocation signal |
Physical Characteristics | |
IP Class | IP20 |
Size | 169x38x172.5 mm |
Weight | 1.0 kg |
Environment | Indoors in an area free from corrosive or combustible gases, liquids, or dust. |
Humidity | 90% RH or less (no condensation) |
Operating Temperature | 0 to 50 C° |
Storage Temperature | -20 to +65 C° |
Safety | 2 input channels (STO1, STO2), 1 output channel (EDM) |