Easy World Automation | Beijer JetCon 2401 RS232/422/485 to fiber serial converter

Beijer JetCon 2401 RS232/422/485 to fiber serial converter

  • Full duplex peer-to-peer or half duplex ring connection
  • Data rate up to 921.6 kbps
  • 100 ST fiber *
  • Auto baud rate and direction
  • 15 kV ESD protection
  • -20~70 °C **
  • * [-s] single-mode 40 km
  • * [-m] multi-mode 5 km
  • ** [-w]-40~70 °C

Description

JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter with extended fiber transmission. Single-mode and Multi-mode fiber optic ports meet your needs for long-distance transmission up to 40KM. JetCon 2401 will automatically detect the data baud rate of the connected full-duplex the serial device, ranging from 300 to 921,600bps. By moving up the DIP switch, JetCon 2401 supports an auto setting function without system power reset to change the serial interface, fiber wiring architecture, and termination of receiver and transmission line. Also, JetCon 2401 is specially designed for applications requiring good immunity of EMI/EMS such as power substation, rail and traffic control signification systems under severe electromagnetic interference and wide temperature range.

JetCon 2401 can be easily wall mounted as well as be mounted directly on DIN rail. AC 24V(12~32V) or DC 24V(12~48V) is available for different operating environments. With IP 30 rigid aluminum case, CE/FCC regulatory approvals, and 5-year global warranty, JetCon 2401 is your reliable choice for hazardous applications.


You can place an order for the Beijer JetCon 2401 RS232/422/485 to fiber serial converter online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Converter specifications
Data transfer speed 300bps to 921.6Kbps
Maximum data transmission distance multi mode : 5KM, single mode : 40KM
Minimum output power converter multi mode : TX Power: -12dBm (Min) ~ -9dBm (Max), single mode : TX Power: -9dBm (Min) ~-8dBm (Max)
Sensitivity to receiving information multi mode : -28dBm (Min), single mode : -27dBm (Min)
Wavelength multi mode : 820nm, single mode : 1310nm
Power Requirements
Maximum power consumption 1.5Watts @ 24V(Maximum)
Power Consumption (Output Adapter) -
Power Input Plugin ( Redundant ) Dual modes for power input, AC 24V(12~32V)/ DC 24V(12~48V)
Standards and protocols
Point-to-point topology
Ring topology
RS-232 Signals TxD, RxD, Signal Ground
RS-422 Signals TxD+, TxD-, RxD+, RxD-, Signal Ground
RS-485-2w Signals TxD+, TxD-, RxD+, RxD-, Signal Ground
Interface
10/100Mb RJ45 (Megabit) Ports
100Mb Fiber optic single mode (Megabit) Ports JetCon2401-S : 1 x 10/100Mb ST Fiber port
10/100/1000Mb (Gigabit) POE Ports
100Mb Fiber optic multi mode (Megabit) Ports JetCon2401-m : 1 x 10/100Mb ST Fiber port
10/100/1000Mb RJ45 (Gigabit) Ports
1000Mb SFP Fiber optic (Gigabit) Ports
100Mb SFP Fiber optic (Megabit) Ports
Number of 10/100Mb PoE port
USB
DSL
Serial port 1 x RS-232/RS-485/RS-422
Other ports
General
Fan / Fanless Fanless
MTBF -
Require cable diameter Multi-mode fiber: 50/125um or 62.5/125um, Single-mode fiber: 8/125um, 9/125um
Physical Characteristics
Dimensions 24.7mm(H) x 74mm (W) x 99mm (D)
Housing IP-30 grade aluminum metal case
Installation DIN-Rail mount or desktop
Isolation
Operating Temperature -20 ~70°C
Operation Humidity 5% ~ 95% (non-condensing)
Protection against excessive consumption -
Protection against reverse flow
Standards and Certifications EMI, EMS, Shock, Vibration, Free Fall
Storage Temperature -40 ~ 80°C
Weight 0.135kg without package
LED Indicators
LED Per Port
Power
Package Checklist
Hardware installation guide
Power adapter
Power cable