Easy World Automation | Beijer JetCon 1302-M fiber media converter

Beijer JetCon 1302-M fiber media converter

  • 1 RJ45 to 1 multi-mode SC fiber converter
  • Link loss forwarding
  • Low latency for EtherCAT
  • -10~70 °C operating temperature

Description

JetCon 1302 is not only a compact 2-port RJ45 to fiber media converter but also a slim 3-port switch which is an ideal model that would physically fit in a network environment with limited space. The feature of fault relay alarm aims to inform you whenever there is any port link down. Just move up the DIP switch, and the fault relay alarm will start functioning! Single-mode and Multimode fiber optic ports meet your needs for long-distance transmission of up to 30KM.

JetCon 1302 can be easily wall mounted as well as be mounted directly on DIN rail. AC 18V~27V or DC 18V~32V is available for different operating environments. With IP 31 rigid and compact aluminum case, 1.5KV Hi-Pot isolation protection, CE/FCC regulatory approvals and 5-year global warranty, JetCon 1302 series are your reliable choices for hazardous applications.


You can place an order for the Beijer JetCon 1302-M fiber media converter online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interface
10/100Mb RJ45 (Megabit) Ports : 2 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation functions
10/100/1000Mb RJ45 (Gigabit) Ports
100Mb Fiber optic multi mode (Megabit) Ports : 1 x Duplex SC
100Mb Fiber optic single mode (Megabit) Ports
1000Mb Fiber optic single mode (Gigabit) Ports
1000Mb SFP Fiber optic (Gigabit) Ports
M12 port
Alert Output -
Standards and protocols
Protocols and work standards IEEE802.3 10Base-T,IEEE802.3u 100Base-TX, IEEE802.3u 100Base-FX,IEEE802.3x flow control
General
Maximum cable length for data transfer 2KM
MTBF 632,171 Hours, MIL-HDBK-217F GB standard
Power Requirements
Power consumed 4.8Watts @ DC 24V
Type of power input 2 pins terminal block
POE Support
Protection against reverse voltage
Protection against overflow
LED Indicators
LNK/ACT
Power
Buttons
DIP Switch : DIP 1~3: Enable or disable port link down alarm for copper port 1/2; fiber port 3, On: Enable port link down alarm, Off: Disable port link down alarm
Physical Characteristics
Standards and Certifications EMI: FCC Class A; CE/EN55022 Class A, EMC Immunity Interface: EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6; EN61000-4-8; EN61000-4-11, Shock: IEC60068-2-27, Free Fall: IEC60068-2-32, Vibration: IEC60068-2-6
Housing IP31 protection, aluminum case
Dimensions 111.8mm(H) x 30mm (W) x 98.2mm (D)
Weight 292g
Operating Temperature -40 ~ 80OC
Storage Temperature -40 ~ 80OC
Operation Humidity 0%~ 95% non-condensing
Installation DIN-Rail mount