Nexcom NET 3500-ECM EtherCAT Motion Controller
- Support CoE protocol
- Support high-level API for CiA 402 profile
- Build-in full function EtherCAT application configurator
- Dual VGA or VGA/DVI independent display
- 3 x RS232 and 1 x RS232/422/485 with Auto Flow Control
- 5th RS232 (option: 4 x digital input, 4 x digital output)
- EtherCAT technology with NexECM, Class A EtherCAT Master
- EtherCAT communication cycle up to 250 μs
Description
NET 3500-ECM features Intel® Turbo Boost and Intel® Hyper-Threading technologies (2 cores, 4 threads), as well as on-processor graphics and two DDRIII 800/1066 memory modules up to 4GB. In addition, NET 3500-ECM provides a wide variety of display I/O configurations and rich I/O interfaces including two Intel® GbE Ethernet ports, 5 x COM ports, 6 x USB, 8 x GPIO, 2 x SATAII, 2 x eSATA, and audio interfaces. NET 3500-ECM is designed for a broad range of applications that demand an EtherCAT controller to handle advanced motion & I/O control.
You can place an order for the Nexcom NET 3500-ECM EtherCAT Motion Controller, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| I/O Interface-Rear | 2-pin Remote Power on/ff switch, +9 to 30VDC input, 1 x PS/2 for Keyboard/Mouse, 1 x DB9 for COM5, RS232 (option: 4 x GPI and 4 x GPO), 1 x DB44 Serial Port for 4 x RS232, (COM2: RS232/422/485 with auto flow control), 2 x GbE LAN ports; Support WoL and PXE, 4 x USB 2.0 ports, 1 x DB15 VGA port, 1 x DVI-I port, 1 x Line-out and 1 x Mic-in |
| CPU Support | Support Intel® Core™ i5-520M PGA processor (2.4GHz, 3M Cache) |
| Main Memory | 2 x 240-pin memory DIMM, up to 4GB DDR3 800/1066MHz SDRAM, un-buffered and non-ECC |
| Expansion Slot | 1 x PCI expansion (10W max./per slot), Add-on card length: 169mm max. |
| Pre-Installed Software Package | Operating system: Windows Embedded Standard 7, Real-time extension: - RTX2012/RTX2016 for 32-bit OS, - RTX2014/RTX64 3.0 for 64-bit OS, EtherCAT Master: NexECM, EtherCAT configurator |
| Device | 1 x 2.5” HDD driver bay |
| EtherCAT Support Table | Basic Features, - Service Commands: Support of all commands, NexECMRtx, - IRQ Field in Datagram: Use IRQ information from Slave in datagram header, NexECMRtx, - Slaves with Device Emulation: Support Slaves with and without application controller, NexECMRtx, - EtherCAT State Machine: Support of ESM special behavior, NexECMRtx, - Error Handling: Checking of network or slave errors, e.g. working counter, NexECMRtx, Process Data Exchange, - Cyclic PDO: Cyclic process data exchange, Network Configuration, - Reading ENI: Network configuration taken from ENI file, NexECMRtx, - Compare Network: Configuration Compare configured and existing network configuration during boot-up, NexECMRtx, - Explicit Device Identification: Identification used for hot connect and prevention against cable swapping, NexECMRtx, - Station Alias Addressing: Support configured station alias in slave, i.e. enable 2nd Address and use it, NexECMRtx, - Access to EEPROM: Support routines to access EEPROM via ESC register, NexECMRtx, Mailbox Support, - Support Mailbox: Main functionality for mailbox transfer, NexECMRtx, - Mailbox polling: Polling mailbox state in slaves, NexECMRtx, CAN Application Layer Over EtherCAT (CoE), - SDO Up/Download: Normal and expedited transfer, NexECMRtx, - Complete Access: Transfer the entire object (with all sub-indices) at once, NexECMRtx, Distributed Clocks, - DC: Support of distributed clock, NexECMRtx |
| EtherCAT Master | Slave module no.: up to 64, Cycle time: up to 250 µs, Synchronization error: ±50ns, Support CiA 402 standard protocol |
| Interface | |
| I/O Interface-Front | ATX power on/off switch, HDD Access/Power status LEDs, 2 x USB 2.0 ports, 2 x eSATA ports |
| Power Requirements | |
| Power Requirements | ATX power mode, OnBoard DC to DC power support from +9 to 30VDC, Optional power adapter |
| Physical Characteristics | |
| Operating temperature | Ambient with air flow: -5°C to 55°C (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14) |
| Storage Temperature | -20°C to 80°C |
| Dimensions | 195mm (W) x 268mm (D) x 80mm (H) (7.7” x 10.5” x 3.1”) |
| Humidity | 10% to 93% (non-condensing) |
| Shock protection | HDD: 20G, half sine, 11ms, IEC60068-2-27 |
| Standards and Certifications | CE approval, FCC Class B, UL/cUL, e13 |
| Vibration Protection | - Random: 0.5Grms @ 5 ~ 500 Hz according to IEC68-2-64, - Sinusoidal: 0.5 Grms @ 5 ~ 500 Hz according to IEC68-2-6 |
