Nexcom PEAK 887VL2 PICMG 1.0-1.3 SBC
- Scalable platform 4th generation Intel® Core™ i7/i5/i3 processor + Non-ECC
- Intel® Q87 PCH chipset support PICMG 1.3 specification
- Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB
- Support PCIex16, 4x PCIex1, 4x USB 3.0/ 4x USB 2.0, 4x SATA 3.0/ 2x SATA 2.0 and GbE
- Display support for VGA, DVI, HDMI
- Dimension 338.58 x 126.39 mm2 (W x L) (8 Layers Single side)
Description
The PEAK 887VL2 is a PICMG1.3 Full-size single computing board featuring Intel® Q87 PCH chipset supports 4th generation Intel® Core™ processor with Dual DDR3L DIMM socket up to 16GB DDR3 1333/1600MHz SDRAM with Non-ECC support and integrated HD Graphic controller.
The Intel® Q87 PCH manages SATA 2.0/3.0 Ports. Furthermore, it supports others versatile I/O ports such as legacy four series ports, KB/Mouse interface, optional TPM function, eight USB ports, four PCI express x1 interface and two Intel® PCI express Gigabit LAN port. It offers a great solution for advance industrial application that requires superb display and processing performance.
You can place an order for the Nexcom PEAK 887VL2 PICMG 1.0-1.3 SBC, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
CPU Support | 4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA 1150 |
Display | The Processor Graphics contains a refresh of the seventh generation graphics, Intel® HD Graphics GT1 / GT2, Share system memory, Analog Display Support, Drive a standard progressive scan analog monitor |
Main Memory | 2 x DIMM, support Dual-channel DDR3L (default)/ DDR3 NON-ECC DIMM (dual voltage models by auto-detection for DDR3 and DDR3L, Maximum 16 GB – 1066/1333/1600 MT/S |
BIOS | AMI system BIOS, 16MBit SPI depended on AMT function, Dual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch) |
On-board LAN | 1x Intel® I217LM GbE PHY 1x Intel® I211 Gigabit Ethernet Controller RJ45 with LED connecter x 2 Support Boot From LAN (PXE) RJ45 LED Support Wake on LAN Extra (External) LED: 2 x 4 pin header |
I/O Interface | ITE8783 PS2 KB/MS reserve 1x6 (2.0m) JST connector 26-pin Box Header x 1 (2.0mm) SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2 RS232/422/485, RI pin can be select RI/5V/12V with jumper (2x3 pin 2.0mm pin-header) 4 Ports USB 2.0 and 4 ports USB 3.0: 2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0) 4 ports through backplane (USB 2.0) 2 ports through I/O bracket (USB 3.0) 4-pin FAN connector x 2 (for CPU,System) On board pin header for IrDA Tx Rx 1x5/2.54mm pin-header HDD LED/ Power LED/ Power ON SW/ Reset SW On Board buzzer USBx1/ USBx1/ LAN1 RJ45 x1/ LAN2 RJ45 x1/ VGA DB15 from top to down |
Power Requirements | |
Power | Power source from Backplane through Golden Finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE) |
Physical Characteristics | |
Operating temperature | -15°C to 60°C |
Storage temperature | -20°C to 85°C |
Relative humidity | 10% to 90%, (Non-condensing) |
Dimensions | 338.58mm x 126.39mm, 8 layers (single side) |
Standards and Certifications | CE approval, FCC Class A, CB/CCC certification |