Nexcom PEAK 888VL2 PICMG 1.0-1.3 SBC
- Support 6th generation Intel® Core™ i7/i5/i3 processor
- Support Intel® Q170/ H110 PCH chipset PICMG 1.3 specification
- Support Dual channel DDR4 with Non-ECC DIMMs 1866/2133MHz up to 32GB
- Support PCIe 3.0 SATA 3.0 W/RAID 0,1,5,10, M.2 NVMe
- Support Display for VGA, DVI/HDMI, DP
- Support Intel® AMT 11 & TPM 1.2/ 2.0(optional)
Description
The PEAK 888 is a PICMG1.3 Full-size Single-Board Computing .It equipped with Intel® 6th generation Core™ i7/i5/i3 processors and Intel® Q170/ H110 chipset. It comes with Dual DDR4 DIMM socket up to 32GB DDR4 1866/2133MHz with Non-ECC support and integrated HD Graphic controller. The PEAK 888Q SKU with Intel® Q170 PCH providing high performance and rich expansion. The SATA3.0 ports with RAID 0, 1, 5 and 10 helps provide quick access to data files and data protection. Furthermore, the advanced storage capabilities with Intel® RST features PCIe Gen3 x4 on NGFF M.2 form factor (2280, 22110) to maximizes storage performance and it also features an integrated Intel® AMT 11 for easier maintenance.
The PEAK 888H SKU with Intel® H110 PCH provides high performance and cost effective solution.
You can place an order for the Nexcom PEAK 888VL2 PICMG 1.0-1.3 SBC, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU Support | 6th generation Intel® Core™ i7/i5/i3 processor (65W/ 35W) TDPs, Socket LGA1151 |
| Display | The Processor Graphics contains a refresh of the ninth generation graphics Intel® HD Graphics 530 Support independent triple display. VGA: Resolution up to 1920*1200 pixels @60MHz DVI : Resolution up to 1920*1200 pixels @60MHz HDMI: Resolution up to 4096*2304 pixels @60MHz DP: Resolution up to 4096*2304 pixels @60MHz * Supporting 4K display required two DDR channels of same size |
| Main Memory | 2 x DIMM, support Dual-channel DDR4 NON-ECC DIMM 1866/2133 MT/S (Maximum32GB) |
| BIOS | AMI system BIOS, 16MBit SPI depended on AMT function, Dual BIOS for Four PCIex1 and One PCIex4 |
| On-board LAN | 1 x Intel® WG1219LM GbE PHY (PEAK 888Q support Intel® AMT 11), 1 x Intel® I211 Gigabit Ethernet Controller, RJ45 with LED connecter x 2, Support Boot from LAN (PXE), Support Wake on LAN |
| I/O Interface | 1 x PCI Express x16 and 1 PCI Express x4 to backplane 4 x PCI to backplane PEAk 888VL2-Q - 5 x SATA 3.0 port (2 x SATA 3.0 to BP through BIOS setting) - 1 x M.2 2280/ 22110 M Key (NVMe Gen 3 PCIex4) - Support RAID 0/1/5/10 - SIO: ITE8786 , COM 1,3,4 Support RS232 , COM2 support RS232/422/485 can be selected RI/5V/12V through jumper PS2 KB/MS *1 JST connector - Parallel Port: 26-pin box header x 1 - 6 Ports USB2.0 and 4 ports USB3.0 2 ports USB2.0, 2 ports USB3.0 1 port USB2.0 Type A (PEAK 888Q only) 4 ports USB 2.0 through backplane 2 ports USB 3.0 through I/O bracket - 2*10 pin header to support TPM module - 2 x Smart FAN connector (for CPU, system) - On-board buzzer - Watchdog time out can be programmable by software from 1 second to 255 seconds |
| Power Requirements | |
| Power | Power source from backplane through golden finger and AUX +12V, Support ATX/AT function by jumper setting, BIOS default is (ATX MODE) |
| Physical Characteristics | |
| Operating temperature | -20°C to 60°C |
| Storage temperature | -20°C to 85°C |
| Relative humidity | 0% to 90%, (Non-condensing) |
| Dimensions | 338.58mm x 126.39mm, 8 layers (single side) |
| Standards and Certifications | CE approval, FCC Class A, CB/CCC certification |
