MOXA ioPAC 5542-HSPA RTU Controller
- CPU: 32-bit ARM9 192 MHz
- 2 x 10/100Base T(X) Ports (RJ45 connector)
- 2 x RS-232/422/485 Serial ports (DB9 male connector)
- 1 x RS-232 Debug port (4-pin connector)
- 8 x Digital Inputs, 8 x Analog Inputs and 8 x Configurable DIOs
- Automation Languages: C/C++ or IEC 61131-3
- Aluminum body design
- 24 VDC (9 to 48 VDC) input power range
- Din-rail and Wall mounting
- -30 to 75°C operating temperature range
Description
The ioPAC 5500 standalone controllers use an ARM9 industrial-grade CPU for the main system, with ARM Cortex™ M4-based CPUs used for I/O channels. The USB bus between the controller CPU and module CPUs transmits data at up to 200 Mbps, and the dual CPU architecture supports up to a 250 Hz per channel analog input sampling rate with millisecond timestamp granularity. The ioPAC 5500 supports C/C++ programming languages, rail-level surge, and ESD protection, a -40 to 75°C (-30 to 75°C for HSPA models) operating temperature range, UL/ cUL Class 1 Division 2 certifications, two 10/100 Mbps Ethernet ports with two MACs (Port Trunking ready), and two 3-in-1 serial ports. With Moxa’s Active OPC Server and DA-Center, the ioPAC 5500 series provides a comprehensive solution for data acquisition and control applications in harsh environments.
End of Life Product - No Replacement
Please note that the ioPAC 5500 Series has been phased out. You can explore the ioPAC 8600 Series the Smart Remote I/O.
Easy World Automation offers the
easiest way to buy the MOXA ioPAC 5542-HSPA RTU Controller in the Middle East (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman) at the lowest price through online inquiring. Our sales
experts will contact you to fulfill all your industrial automation needs.
Specification
| COMPUTER | |
|---|---|
| CPU | 32-bit ARM9 192 MHz, I/O CPU: 32-bit ARM Cortex M4 80 MHz CPU |
| OS | Linux |
| Clock | Real-time clock with battery backup |
| RAM | SDRAM: 64 MB, Flash: 32 MB, SRAM: 256 KB (battery backup lasts for 1 week) |
| MicroSD Slot | Up to 32 GB (SD 2.0 compatible) |
| CONTROL LOGIC | |
| Language | C/C++ or IEC 61131-3 |
| ETHERNET INTERFACE | |
| LAN Ports | 2 x 10/100 Mbps, 2 MACs (IPs), RJ45 |
| Magnetic Isolation Protection | 1.5 kV |
| SERIAL INTERFACE | |
| No. of Ports | 3 Ports: 2 x RS-232/422/485 ports, software selectable, 1 x RS-232 debug port |
| Serial Standards | RS-232 and RS-232/422/485 |
| Connector | DB9 male, 4-pin connector |
| Serial Communication Parameters | Parity: None, Even, Odd; Data Bits: 7, 8; Stop Bits: 1, 2; Flow Control: RTS/CTS, XON/XOFF; Baudrate: 300 bps to 921.6 kbps |
| Serial Signals | RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND, RI; RS-422: Tx+, Tx-, Rx+, Rx-, GND; RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND; RS-485-2w: Data+, Data-, GND |
| POWER REQUIREMENTS | |
| Power Consumption | 305 mA @ 24 VDC |
| Input Voltage | 24 VDC (9 to 48 VDC) |
| Power Connector | Spring-type terminal block |
| SECURITY | |
| Authentication | |
| Encryption | |
| Security | |
| GENERAL | |
| MTBF | - |
| Management | - |
| Supported Protocols | Modbus TCP/RTU (master/slave), SNMP TCP/IP, UDP, DHCP, BOOTP, SNTP, SMTP |
| PHYSICAL CHARACTERISTICS | |
| Housing | Aluminum |
| Dimensions | 90.05 x 135 x 105.4 mm (3.55 x 5.32 x 4.15 in) |
| Weight | 1100 g (2.43 lb) |
| Installation | DIN rail (standard), wall (optional) |
| Operating Temperature | -30 to 75°C (-22 to 176°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications | Safety: UL 508; EMC: EN 55032/24; EMI: FCC Part 15 Subpart B Class A, CISPR 32; EMS:, IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV (L-PE), 1 kV (L-L); Signal: 1 kV, IEC 61000-4-6 CS: 3 V, IEC 61000-4-8 PFMF: 1 A/m; Radio: NCC; Rail Traffic: EN 50121-4; Hazardous Location: Class 1 Division 2 |
| Altitude | 2000 m |
