Proxim Edge Quickbridge QB-1025-LNK-WD Point-to-Point Radio
- High throughput with radio rates of 400 Mbps in MIMO 2x2:2 mode at 40 MHz (License upgradable to 1 Gbps in MU-MIMO 4x4:4 mode at 80 MHz)1
- High power radio delivering up to 27 dBm (4 RF) at 5 GHz.
- High reliability and advanced QoS for quad-play applications.
- Dual IPv4 and IPv6 stacks.
- IP67 rated enclosure with surged protected ethernet port.
Description
The Proxim Edge Quickbridge 1025 is a highly reliable outdoor, high throughput Point to-Point system designed to deliver years of reliable service and priced to fit cost-sensitive medium-range backhaul projects. The Edge Quickbridge is powered by Proxim’s advanced Wireless Outdoor Router Protocol (WORP). Among the many benefits of WORP is its effective use of bandwidth, granular service level management, and an advanced Quality of Service engine.
You can place an order for the Proxim Edge Quickbridge QB-1025-LNK-WD Point-to-Point Radio, which is applicable
in the Oil & Gas industry, online via one of our Middle East
branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a
specific time.
Specification
Interfaces | |
---|---|
Wired Ethernet | One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
Radio Specifications | |
MIMO | 2x2:2 (license upgrade to 4x4:4) |
Modulation | OFDM BPSK-QAM256 |
Frequency | 5.150 – 5.925 GHz (Subject to Country Regulations) |
Channel Size | 20 and 40 MHz (license upgrade to 80 MHz) |
Data Rate | Upto 400 Mbps (license upgrade upto 1000 Mbps) |
TX Power | Up to 24 dBm (dual chain) or 27 dBm (quad chain) |
Throughput | License upgradable to 1 Gbps |
TX Power Control | 0 - 17 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support |
Antenna | |
Antenna Type | Integrated 2x2 MIMO 15 dBi Dual Polarized 30-degree Panel Antenna plus Four RP-SMA Connectors (Software switch between integrated antenna and connectors) |
Management | |
Remote | Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Standards and Protocols | |
Synchronization | - |
Security | |
Encryption | AES 128 |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Network | |
Modes | Bridging, Routing (RIP v2 and IP tunneling) |
IP Stack | IPv4 and IPv6 simultaneously |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Power Requirement | |
Power Consumption | 10 W in MIMO 2x2 mode, 16 W in MIMO 4x4 mode |
Power Supply | 802.3af/at compliant (MIMO 4x4 mode requires 802.3at) |
Physical Characteristics | |
Temperature | OPERATING -30º to 55º Celsius (-22º to 131º Fahrenheit), STORAGE -50º to 70º Celsius (-58º to 158º Fahrenheit) |
Humidity | 100% relative humidity |
IP Rating | IP67 |
Dimensions Packaged | 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in) |
Dimensions Unpackaged | 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in) |
Weight (PACKAGED) | 2.85 kg (6.28 lbs) |
Weight (UNPACKAGED) | 1.24 kg (2.73 lbs) |
Standards and Certifications | UL/IEC/EN 62386-1 and 60950-22 |
Safety | UL/IEC/EN 62386-1 and 60950-22 |
Wind Loading | 180 km/h (112.5 mph) |
General | |
MTBF | 250 000 hours |
Package Checklist | |
Package Contents | One Edge Quickbridge QB-1025-LNK with integrated antenna plus four RP-SMA connectors (Two QB-1025-EPR), Ten RP-SMA weather proofing caps, Two M25 weather proofing cable glands, Two power injectors, and country-specific power cords, Two full axis mounting kits, Two Grounding kits, Two Quick Installation Guides |