Proxim Edge Multipoint MP-1025-BS3-WD Point-to-multiPoint Radio
- High throughput with radio rates of 400 Mbps in MIMO 2x2:2 mode at 40 MHz
- High power radio delivering up to 27 dBm (4 RF) at 5 GHz.
- High reliability and advanced QoS for quad-play applications.
- Dual IPv4 and IPv6 stacks
- AES 128 encryption and Radius based authentication
Base Station
Description
Proxim’s Edge Multipoint 1025 Series products are high-performance point to multipoint radios designed to deliver years of reliable service and priced to fit cost-sensitive projects. The Edge Multipoint 1025 series features one 5 GHz radio delivering up to 400 Mbps data rate. Utilizing Proxim’s highly efficient Wireless Outdoor Router Protocol (WORP), the Edge Multipoint provides a feature set that enables the effective use of bandwidth and offers granular service level management through an advanced Quality of Service engine.
You can place an order for the Proxim Edge Multipoint MP-1025-BS3-WD Point-to-multiPoint Radio, which is applicable in the Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Interfaces | |
---|---|
Wired Ethernet | One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
Antenna | |
Antenna Type | Integrated 2x2 MIMO 15 dBi Dual Polarized 30-degree Panel Antenna plus Four RP-SMA Connectors (Software switch between integrated antenna and connectors) |
Radio Specifications | |
TX Power | Up to 24 dBm (dual chain) or 27 dBm (quad chain) |
MIMO | 2x2:2 (license upgrade to 4x4:4) |
Modulation | OFDM BPSK-QAM256 |
Frequency | 5.150 – 5.925 GHz (Subject to Country Regulations) |
Channel Size | 20 and 40 MHz (license upgrade to 80 MHz) |
Data Rate | Up to 400 Mbps |
Throughput | Up to 400 Mbps |
TX Power Control | 0 - 17 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support |
Management | |
Remote | Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Standards and Protocols | |
Synchronization | - |
Security | |
Encryption | AES 128 |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Network | |
Modes | Bridging, Routing (RIP v2 and IP tunneling) |
IP Stack | IPv4 and IPv6 simultaneously |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE endpoint with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Power requirements | |
Power Consumption | 10 W in MIMO 2x2 mode, 16 W in MIMO 4x4 mode |
Power Supply | 802.3af/at compliant (MIMO 4x4 mode requires 802.3at) |
Physical characteristics | |
Safety | UL/IEC/EN 62386-1 and 60950-22 |
Temperature | OPERATING -30º to 55º Celsius (-22º to 131º Fahrenheit), STORAGE -50º to 70º Celsius (-58º to 158º Fahrenheit) |
Humidity | 100% relative humidity |
IP Rating | IP67 |
Dimensions Packaged | 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in) |
Dimensions Unpackaged | 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in) |
Weight (PACKAGED) | 2.85 kg (6.28 lbs) |
Weight (UNPACKAGED) | 1.24 kg (2.73 lbs) |
Standards and Certifications | UL/IEC/EN 62386-1 and 60950-22 |
Wind Loading | 180 km/h (112.5 mph) |
Package Checklist | |
Package Contents | One Edge MP-1025-BS3/CPE with integrated antenna plus four RP-SMA connectors, Five SMA weatherproofing caps, One M25 weatherproofing cable gland, One power injector, and country-specific power cord, One full axis mounting kit, One Grounding kit, One Quick Installation Guide |
General | |
MTBF | 250 000 hours |