DNWP FlexiNT-GS Network Terminals and Multiplexers

  • 1 x RJ-45; async; V.110; sampling nx64 kbit/s
  • 2 x RJ-45;10/100Base-T; full/half duplex/auto-negotiation; EoT
  • 40.5…57 VDC; AC with AC/DC converter
  • -25 …+55 °C Operating Temperature


FlexiNT-GS devices provide different ways of deploying Ethernet, TDM, and low-speed serial data services over SHDSL.bis local loops or TDM networks. They deliver services over local loop using SHDSL.bis line code with speeds of up to 5.7 Mbit/s over a single copper pair. With bonded SHDSL.bis, it is possible to deliver 22.8 Mbit/s split over four copper pairs.

FlexiNT-GS devices can be used as TDM multiplexers or interface converters where serial, Ethernet and E1 interfaces can be converted or multiplexed to an E1 interface. FlexiNT-GS devices can also work in a box-to-box configuration and act as network terminals (Customer Premises, CP mode) and line terminals (Central Office, CO mode). In addition, FlexiNT-GS devices can function as network terminals for DSL Access Multiplexer (DSLAM) and carry Ethernet over local loop using EFM or ATM mode.

You can place an order for the DNWP FlexiNT-GS Network Terminals and Multiplexers online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Serial V/X interfaces 2 x SSC; V.11/X.21/V.35/V.28; sync/async; V.110 and nx64 kbit/s
Serial RS485 interface 1 x RJ-45; async; V.110; sampling nx64 kbit/s
E1 TDM interfaces 2 x RJ-45; symmetrical 120 ohm; G.703/G.704
Fast Ethernet interfaces 2 x RJ-45;10/100Base-T; full/half duplex/auto negotiation; EoT
Local management interface 1 x RJ-45; V.11 or V.28
Line interface Surge protection: 1.5kV according to ITU-T Rec. K.45 600V RMS common mode according to ITU-T Rec. K.45
Power Requirements
AC power supply Surge protection: 2kV according to ITU-T Rec. K.45
DC power supply Surge protection: 1.0kV according to EN61000-4-5
MTBF 54 years
Physical Characteristics
Dimensions 280 x 32 x 160 mm
Mechanical construction Standalone box
Weight 1.3 kg
Mounting Wall and rail mounting
Operating Power 40.5…57 VDC; AC with AC/DC converter
Power Consumption 9 W
Indoor application IP21 (Ingress Protection 21)
Transport ETSI ETS300019-1-2 class 2.3
Storage ETSI ETS300019-1-1 class 1.2
Operation ETSI ETS300019-1-3 class 3.3
Operating Temperature -25…+55 °C
EMC EN 300 386 V1.6.1:2012
Safety IEC 60950-1:2005 (2nd Edition)