MOXA ioLogik E1263H-T Ethernet Remote I/O
- 10 x Analog Input Channels, 24 x Configurable DIO Channels
- 3 x RTD Channels (Spring-type Euroblock terminal connector)
- 2 x 10/100BaseT(X) Ports (RJ45 connector)
- 1 x RS-232/422/485 Serial port (Terminal block connector)
- Aluminum body design
- 12 to 48 VDC input power range
- DIN-rail and Wall mounting
- -40 to 75°C operating temperature range
Description
Installation of remote Ethernet I/O in offshore environments is a real challenge. It is critical to find devices properly designed for protected, safe use in these environments. Moxa’s IEC 60945-certified ioLogik E1200H Series is ideal for these kinds of demanding industrial applications. Packaged in a compact metal housing, this rugged hardware supports operating temperatures ranging from -40 to 75°C, meeting the stringent demands of IEC 60945 needed for harsh offshore applications.
Daisy-Chained Ethernet I/O Connection
This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions.
The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.
End of Life Product - Replacement Available
Please note that the ioLogik E1200H Series has been phased out and replaced by the ioThinx 4510 Series.
Enjoy the ease of online inquiries for the MOXA ioLogik E1263H-T Ethernet Remote I/O. You can submit your inquiry on our website and get the most friendly communication with our experts to choose high-quality industrial automation products at a reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| Digital Input and Output | |
| Adjustable digital input and output | : 24 x Channels |
| Analog Input and Output | : 10 x Analog Input Channels |
| Relays | |
| Thermal sensor input (RTD) | : 3 x Channels |
| Thermocouple input | |
| LAN | : 2 x 10/100BaseT(X) Ports (RJ45 connector) |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Serial port | : 1 Port |
| Isolation | : 3k VDC or 2k Vrms |
| Buttons | Reset Button |
| Serial Interface | |
| Connector | Terminal block |
| Serial Standards | RS-232/422/485 |
| Serial Communication Parameters | Baudrate: 300 bps to 115.2 kbps; Data Bits: 8; Flow Control: None; Stop Bits: 1 |
| Serial Signals | RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND; RS-422: Tx+, Tx-, Rx+, Rx-, GND |
| Security | |
| Security Functions | - |
| Standards and protocols | |
| Protocols | Ethernet: Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library; Serial: Modbus RTU Server (slave) |
| General | |
| Compatible Softwares | MX-AOPC UA Server, ioSearch utility, MXIO library |
| Management | BOOTP, DHCP Client, HTTP, IPv4, TCP/IP, UDP |
| MTBF | 180,390 hrs |
| Power Requirements | |
| Power Connector | Spring-type Euroblock terminal |
| Input Voltage | 12 to 48 VDC |
| Power Consumption | 343 mA @ 24 VDC |
| LED Indicators | |
| LED Indicators | PWR, RDY, EXP, P1, LAN 1, LAN2, AI channels, DIO channels, RTD channels |
| Physical Characteristics | |
| Housing | Aluminum |
| Dimensions | 204 x 113 x 36.3 mm (8.03 x 4.45 x 1.43 in) |
| Standards and Certifications | EMC EN 55032/24, EN 61000-6-2/-6-4; EMI CISPR 32, FCC Part 15B Class A; EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV, IEC 61000-4-6 CS: 3 V, IEC 61000-4-8 PFMF; Environmental Testing IEC 60068-2-1, IEC 60945, IEC 60068-2-2, IEC 60945; Safety UL 508; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6; Green Product: RoHS, CRoHS, WEEE; Telcordia SR332 |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Weight | 945 g (2.08 lb) |
| Altitude | 2000 m |
