Westermo MCW-211-F1G-T1G Industrial Ethernet to Fiber Media Converter
- Industrial Gigabit Ethernet Media Converter
- 1 x 10 Mbit/s, 100 Mbit/s or 1 Gbit/s Ethernet TX Port (RJ-45 connector)
- 1 x 100 Mbit/s or 1 Gbit/s SFP Port (LC connector, transceivers supported)
- Up to 120 KM Typical data transmission distance on fiber
- DIN-rail mount installation design
- IP21-rated Plastic body material design
- Dual 9.6 – 57.6 VDC power input with Total galvanic isolation
- -40 to +74°C operating temperature range
.png)
Description
The MCW-211-F1G-T1G is an unmanaged media converter with one SFP fibre port supporting 100 Mbit/s or Gbit Ethernet, and one copper port supporting 10/100 Mbit/s or Gbit Ethernet. It is designed for use in heavy-duty industrial, maritime, and rail trackside applications. The unit supports 802.1Q long packets, which allow all standard industrial Ethernet protocols to be used. The Westermo range of 100 Mbit or Gbit Small Form-factor Pluggable (SFP) transceivers is available as multimode, single-mode, or Bi-Di transceivers with distances up to 120 km.
The MCW-211-F1G-T1G is designed for use in industrial applications with dual 9.6 to 57.6 VDC power input. The unique “tri-galvanic” isolation provides isolation between the ports and the power supply and avoids ground loop currents. The IP21 rating ensures that the unit can be installed in locations where condensed water may occur.
Only industrial-grade components are used, which gives the MCW-211-F1G-T1G an MTBF of 1.426.000 hours and ensures a long service life. A wide operating temperature range of –40 to +74 °C (–40 to +165 °F) can be achieved with no moving parts. The MCW-211-F1G-T1G has been tested both by Westermo and external test houses to meet EMC, isolation, vibration, and shock standards, all to the highest levels suitable for heavy industrial, trackside, and maritime environments.
The link fault forward function helps to transfer indications of media failure onto connected ports to ensure that the MCW211-F1G-T1G can be used in resilient network structures. Data rate and flow control can be locked by a DIP switch which can eliminate problems with old legacy Ethernet equipment that is unable to support auto-negotiation.
You can also find the other types of converters in the Converters.
Enjoy the ease of online inquiries for the Westermo MCW-211-F1G-T1G Industrial Ethernet to Fiber Media Converter. You can submit your inquiry on our website and get the most friendly communication with our experts to choose high-quality industrial automation products at a reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 1 Port (or 10 Mbit/s or 100/100 Mbit/s) |
| 10/100/1000Mb RJ45 (Gigabit) Ports | : 1 Port (or 10 Mbit/s or 100 Mbit/s) |
| 10/100Mb (Megabit) POE Ports | |
| 10/100/1000Mb (Gigabit) POE Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 1000Mb Fiber optic multi mode (Gigabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 1000Mb Fiber optic single mode (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | : 1 LC Port (or 100 Mbit/s) |
| M12 port | |
| Alert Output | |
| Magnetic Isolation Protection | |
| Standards and protocols | |
| Protocols and work standards | IEEE 802.3 ,802.1Q |
| General | |
| Maximum cable length for data transfer | 120 Km with Bi-Di Optical Fiber Optic Module |
| MTBF | MIL-HDBK-217F-N2: 1.426.000 hour |
| Power Requirements | |
| Input Voltage | - |
| Input Current | 12 – 48 VDC; 140 – 39 mA |
| Overload Current Protection | - |
| Type of power input | Detachable screw terminal |
| Power Consumption | - |
| Physical Characteristics | |
| Standards and Certifications | EMC: EN 50121-4, Railway applications – Electromagnetic compatibility – Emission and immunity of the signalling and telecommunications apparatus, EN 61000-6-1, Immunity residential environments, EN 61000-6-2, Immunity industrial environments, EN 61000-6-4, Emission industrial environments; Safety: UL 60950-1, IT-equipment; Environmental: NEMA TS 2, Traffic Controller Assemblies with NTCIP Requirements; IP21; MIL-HDBK-217F-N2; Vibration: IEC 60068-2-6 (sine); Shock: IEC 60068-2-27 |
| Housing | Plastic |
| Dimensions | 34 x 123 x 121 mm (1.33 x 4.84 x 4.76 in) |
| Weight | 0.25Kg |
| Operating Temperature | –40 to +74 ºC (–40 to +165 ºF) |
| Storage Temperature | –50 to +85 ºC (–58 to +185 ºF) |
| Operation Humidity | 5 to 95 % (non-condensing) |
| Installation | Din-rail mounting |
