Westermo MCI-422-SM-SC30 Industrial Ethernet to Fiber Media Converter
- 2 × 100 Mbit/s Fibre port using SC connectors
- 2-channel Ethernet to Fibre Media Converter
- 2 × 10/100 TX ports with Auto MDI/MDI-X, Auto-Negotiation
- Brand: WESTERMO
- Product Code: MCI-422-SM-SC30
.png)
Description
The Westermo MCI-422 is not only a compact 4-port switch, but also a 2 channel RJ45 to fibre media converter. As a switch the MCI-422 is an industrial 4-port 10/100 Mbit/s Fast Ethernet Fibre Switch, incorporating 3.2 Gbit/s switching fabric with non-blocking store and forward technology. In converter mode it is a 2-channel 10/100 TX to 100 FX media converter, featuring remote Link Loss Forwarding technology.
The unit is simply configured as either device using a DIP switch. The LFF is also set up in this way.
The MCI-422 has dual redundant power inputs with wide DC range 10 ~ 60 V, it also has an alarm relay to trigger an alarm signal for port or power events. Two versions are available for either single mode or multimode fibres. The MM version for multimode fibres up to 2KM and the SM version for single mode fibre to 30km.
You can place an order for the Westermo MCI-422-SM-SC30 Industrial Ethernet to Fiber Media Converter, which is applicable in the IP Surveillance industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 2 Ports |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | : 2 SC Ports |
| 1000Mb Fiber optic single mode (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| M12 port | |
| Alert Output | |
| Standards and protocols | |
| Protocols and work standards | IEEE 802.3 ,IEEE 802.1Q |
| General | |
| Maximum cable length for data transfer | 30Km |
| MTBF | - |
| Power Requirements | |
| Power consumed | 24V DC |
| Type of power input | Terminal input |
| POE Support | |
| Protection against reverse voltage | |
| Protection against overflow | - |
| LED Indicators | |
| LNK/ACT | |
| Power | |
| Buttons | |
| DIP Switch | CH. B Fibre link event alarm control, CH. A Fibre link event alarm control, CH. B Copper link event alarm control, CH. A Copper link event alarm control, Operating mode select, Converter mode, Link Loss Forwarding control, Enable, Power Event Alarm Control |
| Physical Characteristics | |
| Standards and Certifications | CE/EN 55022 class A, FCC Class A, Compliance with EN 50155 EMI, EN 61000-3-2:2006, EN 61000-3-3, EN 61000-6-2, CE/ EN 55024, EN 61000-6-4, Compliance with EN 50155 EMS, IEC 61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC 60068-2-27, IEC 60068-2-6, IEC 60068-2-32, IP-31 |
| Housing | Aluminium |
| Dimensions | 99x55x120mm |
| Weight | - |
| Operating Temperature | -25 to 75 ° C |
| Storage Temperature | -40 to 75 ° C |
| Operation Humidity | 0% ~ 95%, (non-condensing) |
| Installation | Din-rail |
