Easy World Automation | Proxim Tsunami XP-10150-BS1-US Point-to-multiPoint Access Point

Proxim Tsunami XP-10150-BS1-US Point-to-multiPoint Access Point

  • Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data)
  • Radio #1 : Integrated 2x2 MIMO 22 dBi Dual Polarized 1 foot Antenna, Radio #2 : Two N-type Connectors with built-in Surge Protection
  • Radio #1 : Up to 672 Mbps @ 80 MHz, Radio #2 : Up to 150 Mbps
  • IP67

Description

Proxim’s Tsunami® XP-10100 is a single endpoint solution delivering high-performance outdoor WiFi. By combining a near-line-of-sight Point-to-Multipoint Subscriber Unit (SU) with an ORiNOCO® Access Point into a single unit, outdoor hotspots can enable rapid and reliable deployment. The Tsunami® XP-10100 is designed explicitly for the Wireless Internet Service Provider but is equally suited to delivering campus-wide connectivity.


You can place an order for the Proxim Tsunami XP-10150-BS1-US Point-to-multiPoint Access Point, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interfaces
Wired Ethernet Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data)
Wireless Protocol - Radio #1: WORP® (Wireless Outdoor Router Protocol), - Radio #2: Wi-Fi (802.11b/g/n)
Antenna
Antenna Type Radio #1 : Integrated 2x2 MIMO 22 dBi Dual Polarized 1 foot Antenna, Radio #2 : Two N-type Connectors with built-in Surge Protection
Radio Specifications
Frequency Radio #1 : 4.900 – 5.925 GHz (Subject to Country Regulations), Radio #2 : 2.400 – 2.484 (Subject to Country Regulations)
Throughput Radio #1 : Up to 672 Mbps @ 80 MHz, Radio #2 : Up to 150 Mbps
Other Radio #1 : Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature , Automatic Transmit Power Control (ATPC) with EIRP limit support, Radio #2 : Automatic Channel Selection (ACS)
Management
Remote Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Standards and Protocols
Synchronization Pass-through IEEE 1588v2 Ethernet Synchronization
Security
Encryption Radio #1 : AES 128, Radio #2 : 802.11i/WPA2 and WPA Wireless Security with AES-128, TKIP or WEP
Authentication Radio #1 : Internal MAC Address Control List, Radius based Authentication, Radio #2 : Enterprise/802.1x, Personal/ PSK (Pre Shared Key) or Open
Network
Modes Radio #1 : Bridging, Routing (RIP v2 and IP tunneling), Radio #2 : Access Point
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Power requirements
Input Power 36 to 57 VDC via Ethernet port1 (PoE), 12 VDC via Access port, Power should not be provided simultaneously on both ports
Output Power 48 to 57 VDC – 25 Watt max on Ethernet port2 (PoE – software controlled), 12 VDC on Access port
Power Consumption 23 Watt typical
Physical characteristics
Safety UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22)
Temperature OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 14.56 x 13.0 x 7.87 in (370 x 331 x 200 mm)
Dimensions Unpackaged 12 x 12 x 3.40 in (305 x 305 x 85 mm)
Weight (PACKAGED) 11.90 lbs (5.4 kg)
Weight (UNPACKAGED) 6.17 lbs (2.8 kg)
Standards and Certifications USA: FCC 90Y + 15C + 15E (UNII 15.247), Canada: IC RSS 102 + RSS 111 + RSS 247, Europe: RED EN 301 489-1 + EN 301-489-17 + EN 300 328 + EN 301 893 + EN 302 502, Railway: EN 50155 + EN 50121 + EN 61373
Wind Loading 200 km/h (125 mph)
Package Checklist
Package Contents One Tsunami® XP-10100-SUA unit with four N-type surge protected connectors Or One Tsunami® XP-10150-BS1/SUR unit with integrated 22 dBi panel antenna plus two N-type surge protected connectors, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit, One Grounding kit, Two 2.4 GHz, 5 dBi omni antennas, One Antenna alignment (RJ11) dongle, One Quick Installation Guide
General
MTBF 250 000 hours