Proxim Tsunami QB-826-LNK-100 Point-to-Point Radio

  • One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
  • 2x2 MIMO
  • Integrated 15 dBi dual Polarized (H+V) panel antenna
  • IP67


Tsunami Quickbridge® 826 series is an incredibly cost-effective, non-Line-of-Sight Point-to-Point (PtP) wireless backhaul solution. With this complete “Hop-in-a-Box” solution delivering up to 100 Mbps throughput, deployments of all sizes will enjoy a quick return on investment.

With excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video, and data applications, Tsunami Quickbridge® 826 series satisfies carriers, wireless service providers, and Government organizations with requirements for reliable cost-optimized high-performance wireless backhaul operating in the 5.900 – 6.425 GHz band.

You can place an order for the Proxim Tsunami QB-826-LNK-100 Point-to-Point Radio, which is applicable in the Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Wired Ethernet One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Radio Specifications
Modulation OFDM with BPSK, QPSK, QAM16, QAM64
Frequency 5.900 – 6.425 GHz (Subject to Country Regulations)
Channel Size 40 MHz, 20 MHz, 10 MHz, 5 MHz channel bandwidths
Data Rate MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection
TX Power Up to 25 dBm (dual chain)
TX Power Control 0 – 20 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support
Antenna Type Integrated 15 dBi dual Polarized (H+V) panel antenna
Remote Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Encryption AES-CCM 128 bits
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Throughput Capacity Up to 100 Mbps
Gateway Features DHCP Server & relay, NAT with Std ALGs
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Power Requirement
Power Consumption 6 Watt typical (15 Watt max)
Physical Characteristics
Temperature OPERATING TEMPERATURE -40º to 55ºC (-40º to 131º Fahrenheit), STORAGE TEMPERATURE -55º to 70ºC (-67º to 158º Fahrenheit)
Humidity Max 100% relative humidity (non-condensing)
IP Rating IP67
Dimensions Packaged 13.97 x8.86 x 6.92 in (355 x 225 x 176 mm)
Dimensions Unpackaged 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) – Each End Point
Weight (PACKAGED) 9.8 lbs (4.45 Kg)
Weight (UNPACKAGED) 2.1 lbs (0.950 kg) – Each end point
Safety UL 60950-1/22
Wind Loading 180 km/h (112 mph)
MTBF 200,000 hours
Package Checklist
Package Contents One Tsunami® QB-826-LNK-100 with integrated antenna (Two Tsunami® QB-826-EPR-100 ), Two 20 W power injector and country specific power cord, Two basic Pole mounting kit, Two Connector weatherproofing kit (Includes all recommended weatherproofing material), Two Grounding kit, Two Quick Installation Guide