Description
The Tsunami® Multipoint 835 CPE is an ideal solution for large-scale wireless deployments and provides an excellent value proposition to WISPs planning wireless broadband last-mile access deployments.
The MP-835-CPE enables seamless roaming up to 295 km/h (185 mph) for use in mobile applications such as the provision of Internet access or video surveillance on trains, trams, and buses.
This CPE also features a carrier-grade prioritization platform supporting multiple service classes and is able to prioritize voice, video, and data applications to enable granular management of customer service features.
You can place an order for the Proxim Tsunami MP-835-CPE-25 Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Interfaces | |
---|---|
Wired Ethernet | One auto MDI-X RJ45 10/100 Mbps Ethernet with PoE in |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) or WORP sync |
Antenna | |
Antenna Type | Integrated 15 dBi dual Polarized (H+V) panel antenna (12 dBi before 5.000 GHz and 14 dBi beyond 5.850 GHz) |
Radio Specifications | |
TX Power | Up to 26 dBm (dual chain) |
MIMO | 2x2 MIMO |
Modulation | OFDM with BPSK, QPSK, QAM16, QAM64 |
Frequency | 4.900 - 5.925 GHz (Subject to Country Regulations |
Channel Size | 40 MHz, 20 MHz, 10 MHz*, 5 MHz* channel bandwidths |
Data Rate | MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection, BPSK, QPSK, 16-QAM and 64-QAM for legacy mode (6Mbps - 54Mbps) |
Throughput | Up to 25 Mbps |
TX Power Control | 0 – 15 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit |
Other | Dynamic Channel Selection (DCS) based on interference detection. , Dynamic Frequency Selection (DFS) based on radar signature. , Automatic Transmit Power Control (ATPC) with EIRP limit support |
Management | |
Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Security | |
Encryption | AES-CCM 128 bits |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Network | |
Modes | Bridging, Routing (RIP v2 and IP tunneling |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Power requirements | |
Power Consumption | 6 Watt typical |
Physical characteristics | |
Safety | UL 60950-1/22 |
Temperature | OPERATING -30º to 50ºC (-22º to 122º Fahrenheit) Cold start at -20ºC (-4º Fahrenheit), STORAGE -55º to 70ºC (-67º to 158º Fahrenheit) |
Humidity | Max 100% relative humidity (non-condensing) |
IP Rating | IP67 |
Dimensions Packaged | 13.97 x 8.86 x 3.46 in (355 x 225 x 88 mm) |
Dimensions Unpackaged | 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) |
Weight (PACKAGED) | 4.9 lbs (2.225 Kg) |
Weight (UNPACKAGED) | 2.1 lbs (0.950 kg) |
Wind Loading | 180 km/h (112 mph) |
Package Checklist | |
Package Contents | One Tsunami® MP-835-CPE-10/25 with integrated antenna, One 20 W power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Grounding kit, One basic Pole mounting kit, One Quick Installation Guide |
General | |
MTBF | 350,000 hours |