Description
The Tsunami® Multipoint 826 CPE is an ideal solution for
large-scale wireless deployments and provides excellent value proposition
to WISPs planning wireless broadband last-mile access deployments. Specifically
designed to operate in the 6.4 GHz band, this product is designed to be fully
compatible with the MP8620 series products.
The MP-826-CPE enables transparent roaming up to 295 km/h (185 mph) for use in mobile applications such as the provision of Internet access or video surveillance on trains, trams, and busses.
You can place an order for the Proxim Tsunami MP-826-CPE-50 Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Interfaces | |
---|---|
Wired Ethernet | One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
Antenna | |
Antenna Type | Integrated 15 dBi dual Polarized (H+V) panel antenna |
Radio Specifications | |
TX Power | Up to 25 dBm (dual chain) |
MIMO | 2x2 MIMO |
Modulation | OFDM with BPSK, QPSK, QAM16, QAM64 |
Frequency | 5.900 – 6.425 GHz (Subject to Country Regulations) |
Channel Size | 40 MHz, 20 MHz, 10 MHz, 5 MHz channel bandwidths |
Data Rate | MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection |
Throughput | Up to 50 Mbps |
TX Power Control | 0 – 20 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit |
Other | Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support |
Management | |
Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Security | |
Encryption | AES-CCM 128 bits |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Network | |
Modes | Bridging, Routing (RIP v2 and IP tunneling) |
IP Stack | IPv4 and IPv6 simultaneously |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Power requirements | |
Power Consumption | 6 Watt typical (15 Watt max) |
Physical characteristics | |
Safety | UL 60950-1/22 |
Temperature | OPERATING -40º to 55ºC (-40º to 131º Fahrenheit), STORAGE -55º to 70ºC (-67º to 158º Fahrenheit) |
Humidity | Max 100% relative humidity (non-condensing) |
IP Rating | IP67 |
Dimensions Packaged | 13.97 x 8.86 x 3.46 in (355 x 225 x 88 mm) |
Dimensions Unpackaged | 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) |
Weight (PACKAGED) | 4.9 lbs (2.225 Kg) |
Weight (UNPACKAGED) | 2.1 lbs (0.950 kg) |
Wind Loading | 180 km/h (112 mph) |
Package Checklist | |
Package Contents | One Tsunami® MP-826-CPE with integrated antenna, One 20 W power injector and country specific power cord, One basic Pole mounting kitm One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Grounding kit, One Quick Installation Guide |
General | |
MTBF | 200,000 hours |