.png)
Description
The Tsunami® MP-10100 product family is a series of very high throughput, reliable and cost-effective, near-line-of-sight point-to-multipoint wireless products. The Tsunami® MP-10100 series supports the following features and is ideal for last-mile access, video surveillance, or mobile applications that need rugged and reliable high-speed network connectivity.
You can place an order for the Proxim Tsunami MP-10150-SUR-US Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Interfaces | |
|---|---|
| Wired Ethernet | Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) |
| Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
| Antenna | |
| Antenna Type | Integrated 2x2 MIMO 22dBi Dual Polarized 1 foot Panel Antenna |
| Radio Specifications | |
| TX Power | Up to 28 dBm (dual chain) |
| MIMO | 2x2:2 |
| Modulation | OFDM with BPSK, QPSK, QAM16, QAM64, QAM256 |
| Frequency | 4.900 – 5.925 GHz (Subject to Country Regulations) |
| Channel Size | 80 MHz, 40 MHz and 20 MHz (±5ppm channel accuracy) |
| Data Rate | MCS 0 to 9 with Dynamic Data Rate Selection |
| TX Power Control | 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
| Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
| Management | |
| Remote | Telnet and SSH, Web GUI and SSL/TLS, TFTP, SNMPv3 |
| SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
| Standards and Protocols | |
| Synchronization | Pass-through IEEE 1588v2 Ethernet Synchronization |
| Security | |
| Encryption | AES 128 |
| Network | |
| Modes | Bridging, Routing (RIP v2 and IP tunneling) |
| IP Stack | IPv4 and IPv6 simultaneously |
| Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
| VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| Power requirements | |
| Input Power | 36 to 57 VDC via Ethernet port1 (Power over Ethernet), 12 VDC via Access port, Power should not be provided simultaneously on both ports |
| Power Consumption | 17 Watt typical |
| Physical characteristics | |
| Safety | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
| Temperature | OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit) |
| Humidity | 100% relative humidity |
| IP Rating | IP67 |
| Dimensions Packaged | 14.56 x 13.0 x 7.87 in (370 x 331 x 200 mm) |
| Dimensions Unpackaged | 12 x 12 x 3.40 in (305 x 305 x 85 mm) |
| Weight (PACKAGED) | 10.91 lbs (4.95 kg) |
| Weight (UNPACKAGED) | 5.30 lbs (2.4 kg) |
| Standards and Certifications | USA: FCC 90Y + 15E (UNII 15.247), Canada: IC RSS 102 + RSS 111 + RSS 247, Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502, Railway: EN 50155 + EN 50121 + EN 61373 |
| Wind Loading | 200 km/h (125 mph) except MP-10150-SUL: 180 km/h (112.5 mph) |
| Package Checklist | |
| Package Contents | One Tsunami® MP-10100-BSU/SUA with two N-type surge protected connectors Or One Tsunami® MP-10150-BS9/BS1/SUR/SUL with integrated dual polarized antenna, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit, One Antenna alignment (RJ11) dongle, One Grounding kit, One Quick Installation Guide |
| General | |
| MTBF | 250 000 hours |
