Easy World Automation | Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio

Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio

  • Wide Band 5 GHz Radio
  • 4x4 MIMO radio delivering up to 380 Mbps2
  • Advanced QoS for quad-play applications
  • AES 128 encryption and Radius authentication
  • Full tilt and swivel mounting kit included.

  • Brand: PROXIM
  • Product Code: Edge Multipoint MP-1025-BSU-32SU-UPG

Description

Proxim’s Edge Multipoint 1025 Series products are high-performance point to multipoint radios designed to deliver years of reliable service and priced to fit cost-sensitive projects. The Edge Multipoint 1025 series features one 5 GHz radio delivering up to 400 Mbps data rate. Utilizing Proxim’s highly efficient Wireless Outdoor Router Protocol (WORP), the Edge Multipoint provides a feature set that enables the effective use of bandwidth and offers granular service level management through an advanced Quality of Service engine.


You can place an order for the Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio, which is applicable in the Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Antenna
Antenna Type Integrated 2x2 MIMO 15 dBi Dual Polarized 30-degree Panel Antenna plus Four RP-SMA Connectors (Software switch between integrated antenna and connectors)
Radio Specifications
TX Power Up to 24 dBm (dual chain) or 27 dBm (quad chain)
MIMO 2x2:2 (license upgrade to 4x4:4)
Modulation OFDM BPSK-QAM256
Frequency 5.150 – 5.925 GHz (Subject to Country Regulations)
Channel Size 20 and 40 MHz (license upgrade to 80 MHz)
Data Rate Up to 400 Mbps
Throughput Up to 400 Mbps
TX Power Control 0 - 17 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support
Management
Remote Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Standards and Protocols
Synchronization -
Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE endpoint with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Power requirements
Power Consumption 10 W in MIMO 2x2 mode, 16 W in MIMO 4x4 mode
Power Supply 802.3af/at compliant (MIMO 4x4 mode requires 802.3at)
Physical characteristics
Safety UL/IEC/EN 62386-1 and 60950-22
Temperature OPERATING -30º to 55º Celsius (-22º to 131º Fahrenheit), STORAGE -50º to 70º Celsius (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in)
Dimensions Unpackaged 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in)
Weight (PACKAGED) 2.85 kg (6.28 lbs)
Weight (UNPACKAGED) 1.24 kg (2.73 lbs)
Standards and Certifications UL/IEC/EN 62386-1 and 60950-22
Wind Loading 180 km/h (112.5 mph)
Package Checklist
Package Contents One Edge MP-1025-BS3/CPE with integrated antenna plus four RP-SMA connectors, Five SMA weatherproofing caps, One M25 weatherproofing cable gland, One power injector, and country-specific power cord, One full axis mounting kit, One Grounding kit, One Quick Installation Guide
General
MTBF 250 000 hours