Nexcom MVS 5210-R Railway Mobile NVR
- Multitasking PC+NVR
- VMS software installed
- EN50155 Class TX conformity
- Train information stamp in video
- 24VDC and 110VDC power input
- Dual removable SATA 3.0 SSD/HDD
- 8 x M12 10/100/1000 Mbps 802.3af PoE ports
- 5th generation Intel® Core™ dual-core i7-5650U, 2.2GHz
Description
MVS 5210-R performs 8-CH live view when keeping recording the video simultaneously without lags. It provides multitasking capabilities such as running video analytics software like people counting continuously while recording real-time videos.
MVS 5210-R mobile network video recorder promotes increased safety and security for railway passenger transportation with high video frame rates and 2 extensive removable storage HDD/SSD capacities. It connects up to 8 IP cameras + PoE function providing reliable and high-quality video coverage around the train. Railway information stamps such as location, speed, or other critical data can be recorded and shown in the video.
MVS 5200-R leverages wireless networks to simplify railway management with remote, real-time video monitoring capabilities. This remote capability keeps transit fleets in service around the clock. EMC and environment test in EN50155 secure MVS 5210-R can operate in daily railway environments.
For added physical security, the pre-alarm function on MVS 5210-R features 2 x DI, 2 x DO and GNSS that can operate in a power-off state, ensuring railway location, alarm, and emergency notifications are constantly available at times of intrusion or urgent conditions. Optional backup battery guards against any unexpected power shutdown or unstable power.
You can place an order for the Nexcom MVS 5210-R Railway Mobile NVR, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| NVR System | Video Codec - H.264, Audio Codec - G.726/G.711, Live View Resolutions - QVGA/VGA/SXGA/Full HD/3M/5M, Recording Resolution - QVGA~5M, Live Preview - Support 1/4/9 division, full-screen, snapshot, Record - Round the clock/motion record modes/event trigger, Record Device - 2 x 2.5” SATA 2.0 removable HDD/SSD trays with lock, Playback - 1/4/9 division, full-screen/snapshot/display original ratio or fit window, - Search mode: Play/reverse/pause/seek/pre frame/next frame, - Speeds: 1/4, 1/2, 1, 2, 4, 8, 16, 32, Video Stamp - Capability to show and record railway information in video, * AMTK camera is required, Camera Setting - Auto search, profile selectable, ONVIF support, Disk Management - Partition management, format partition, S.M.A.R.T status |
| General | |
| Operating System | Windows 7/WES7/Windows 8/WES8/Linux kernel 3.X |
| PC System | CPU - 5th generation Intel® Core™ dual core i7-5010U, 2.1GHz, Memory - 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory, Storage - 1 x CFast (externally accessible), 1 x mSATA, Expansion - 1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket (USB 2.0 + PCIe), 1 x full size Mini-PCIe socket (mSATA), GPS and On Board Sensor - 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou, - Optional modules with Dead Reckoning available, - Built-in G-sensor, Power over Ethernet - 8-port M12 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W |
| Interface | |
| I/O Interface-Front | PC Function - 4 x LED indicators for power/storage/WLAN/WWAN, - 1 x CFast socket with cover. 1 x Reset button, - 2 x dual USB type A connectors for 1 x USB 3.0 + 1 x USB 2.0 port, - 1 x DB15 connector, MCU DIO (2 x DI, 2 x DO), 1 x analog input, 1 x speed frequency input, 1 x iButton, 1 x RS232 (for RFID reader w/ 12VDC output), 1 x direction signal for optional Dead Reckoning module, - 2 x externally accessible SIM card sockets (selectable), - 6 x antenna holes for WWAN/WLAN/BT/GPS, NVR Function - 2 x removable 2.5" HDD/SSD trays with lock, - 1 x DB-15 VGA output for live view, - 1 x DB-15 VGA input for PC VGA switch |
| I/O Interface-Rear | PC Function - 8 x M12 10/100/1000 Mbps PoE ports, - 2 x M12 10/100/1000 Intel® Fast Ethernet with LED, - 1 x 24VDC/110VDC input in circular connector with ignition and 80W typical power consumption, - 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port, - 1 x M12 connector for 1 x Mic-in and 1 x Line-out, - 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, - 1 x DB26 LVDS interface with 12V and USB2.0, - 2 x DB-9 RS-232/422/485 (w/ optional 3KV isolation protection), - 1 x 16-pin terminal block connector, - 1 x CAN Bus 2.0B (on board), - 8 x GPIO, (4 x Digital inputs, w/ optional 3KV isolation protection), Input voltage (internal type): 5VDC TTL (default), Input voltage (source type): 3~12VDC, (4 x Digital outputs, w/ optional 3KV isolation protection), Digital output (sink type): 5VDC TTL (default), max current: 20mA, Digital output (source type): 3~24VDC, max current: 150mA, NVR Function - 2 x USB type A connectors, 1 x Reset button, - 1 x switch for VGA input selection (NVR or PC), - 4 x LED indicators for power/storage/storage alarm/camera, - 1 x phone jack 3.5mm for 1 x Line-out |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode, Optional internal 1100mAh, Li-Polymer rechargeable battery |
| Physical Characteristics | |
| Dimensions | 260mm (W) x 206mm (D) x 137mm (H) (10.24" x 8.11" x 5.39") |
| Storage temperatures | -40°C~80°C |
| Humidity | 10% to 90% (non-condensing) |
| Operating temperatures | EN50155 Class TX (w/ industrial SSD) with air flow |
| Weight | 3.3kg |
| Environment | Vibration (random): 1g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock |
| Standards/Certifications | CE approval, FCC Class A, EN50155 Class TX |
